Tureks Plumbing Services Blog: Posts Tagged ‘Plumbing Pipe Repair’

How Does the Trenchless Pipe Repair Process Work?

Wednesday, August 5th, 2020

How Does  the Sewer Pipe Lining Process Work?

  • trenchless sewer repair in Appleton WI

Having sewer lines replaced or repaired can be difficult. Traditional pipe repair methods require a long, deep trench from your house to your curb to gain access to the pipe underground. This method is costly and can be damaging to your property, says Rancho Cordova Pipe Repair Company, Gilmore Heating, Air, & Plumbing.   

Fortunately, Tureks Plumbing Services now offers trenchless pipe repair so that you don’t have to go through those problems. If the pipes were made from clay, iron, concrete, or other materials, chances are those pipes are worn down. One of our pipe repair professionals in Appleton, Wisconsin, can perform a camera video inspection to confirm that you can benefit from our trenchless pipe relining service, or another method would be better suited to the existing defect.

Trenchless Pipe Repair Explained

First, our pipe repair company in Appleton, Wisconsin will determine if trenchless pipe relining can be done on your property. 

  1. A pipe repair technician will use a sewer camera to identify and evaluate the problem.
  2. An access hole is dug at both ends of the pipe. 
  3. A flexible tube is pushed into the old pipe. The flexible tube looks like neoprene, and it is coated with a special resin.
  4. The technician pumps compressed air into it so that it can blow out and cling to the interior walls of the old sewer pipe. 

After several hours, the resin hardens and then there will be a solid pipe inside the existing pipe. At this point, the pipe will have a slightly smaller internal diameter. This is hardly anything to worry about because the pipe will allow wastewater to flow through easily since the pipe is now smooth, and roots will no longer penetrate it.

No Damage to Trees

When undergoing traditional methods, any trees in the way of the trench have to be uprooted to access the pipes underneath. With point repair, trees can remain intact during the work.

Using advanced tools, Tureks Plumbing Services personnel can map and locate all the underground utilities to avoid disruption of those areas. This is why trenchless pipe repair doesn’t pose threats to anything else underground.

Pipe relining may not be an option if the sewer pipe on your property has a low point where water can pool. Similarly, offset pipe sections also preclude the use of trenchless pipe repair, and our Appleton plumber will recommend an alternative repair method, such as traditional excavation or pipe bursting.

Is Trenchless Pipe Repair Right for Me?

The only way to be certain that trenchless pipe repair is feasible on your property is by having an experienced professional conduct an inspection. If the method is applicable, you will get to enjoy this long-term, cost-effective pipe repair method. Even if trenchless pipe repair can’t be used, we will use the most suitable techniques and tools to restore the structural integrity of the sewer pipes on your property. Contact a Fox City plumber today and learn more about how trenchless pipe repair can be used in your home.

Continue Reading

Tags: , , , , ,
Posted in Fox Valley Plumber, Plumbing Pipes, Trenchless Sewer Repair | Comments Off on How Does the Trenchless Pipe Repair Process Work?

5 Plumbing Problems That Should Be Left to the Professionals

Wednesday, July 8th, 2020

5 Plumbing Problems That Should Be Left to the Professionals

5 plumbing problems for professionals - Turek's Plumbing

In these difficult times, you might be tempted to tackle every repair job that is needed in your home so that you can minimize the contact that your family has with non-family members. However, it isn’t always advisable to take matters in your own hands, especially when the problem has to do with the plumbing system. Here are some plumbing problems that we at Tureks Plumbing Services believe you should leave to the pros.

A Drop in Water Pressure

Seeing the water pressure in your home plummet can be extremely annoying and inconvenient. You should never rush to resolve this situation by yourself. For starters, water pressure lowers for a wide variety of reasons, and not many homeowners have the skills or tools to pinpoint the exact fault behind the loss of water pressure.

It is therefore advisable for you to contact a plumber in Appleton, Wisconsin so that he or she can get to the root of the problem and then implement the appropriate remedial measures.

No Hot Water

The water heater is a vital appliance in every home. The loss of hot water can throw your plans in disarray as you will be unable to do anything that requires hot water. These activities include running the dishwasher, taking a hot shower or even doing the laundry.

Our friends at McQuillan Bros, an HVAC and plumbing company in St. Paul say that you should never attempt to fix a water heater problem by yourself. This precaution is necessary because the water heater is intricately linked to the electrical or gas system as well as the water supply. Tinkering with such a complex system may be catastrophic, such as triggering water damage when you accidentally damage a water line. You are therefore better off contacting a plumbing company in Appleton Wisconsin so that an experienced professional can check the heater and resolve any issues preventing it from doing its work.

Pipe Leaks

Leaking pipes are another plumbing problem that should best be left to the professionals. This is because many times, where a leak manifests may not necessarily be the point at which the pipe is damaged.

Secondly, it can be hard to access the damaged section of the pipe since the affected pipe may be buried in a wall, ceiling or floor. Only the experienced hands and tools of a plumber in Appleton Wisconsin can safely and quickly ascertain the source of a pipe leak. Once the source is identified, it is easy for the plumber to disassemble the wall, floor or ceiling in order to fix the damage without causing additional damage to your property. Reassembly is also easy for plumbers since they have handled similar plumbing problems hundreds of times.

Blocked Plumbing Pipes

Many homeowners are tempted to buy a plumbing snake or a commercial drain cleaner when a pipe is blocked in their homes. While these solutions seem appropriate enough, they are fraught with a lot of risks.

For example, the harsh chemicals in the commercial drain cleaner could damage the plumbing pipes while the snake can also perforate a pipe if it isn’t used properly. 

The best course of action is to get in touch with a plumber in Appleton, Wisconsin so that the skilled professional can diagnose the problem and then use the most appropriate professional tools to resolve the blockage.

Frozen Pipes

The cold weather brings its own challenges to your hard working plumbing system. For example, frozen pipes are a common problem that we at Turek’s Plumbing Services get called to address by homeowners in Appleton Wisconsin.

When a pipe freezes, you may think that the remedy is as simple as applying heat to the frozen section of the pipe. This isn’t usually the right course of action to take, especially when the affected pipes were made from plastic.

Contact a Fox Valley plumbing company and let their skilled Appleton plumbers check the pipes and select the best remedy to resolve the problem before it escalates (the pipe could burst and spew water into your home, for example).

At Tureks Plumbing Services, we are aware that plumbing accidents can occur at any time of the day or night, and such accidents can cause a lot of damage. If you are searching for an Appleton Wisconsin plumbing company that you can trust with plumbing services, contact us and we will make sure that the plumbing system gets back quickly to its best when a defect develops. Make that call today!

Continue Reading

Tags: , ,
Posted in Plumbing Problems | Comments Off on 5 Plumbing Problems That Should Be Left to the Professionals

Types Of Plumbing Pipes And Their Uses

Wednesday, June 6th, 2018

[vc_row][vc_column width=”1/6″][/vc_column][vc_column width=”2/3″][mk_padding_divider][vc_column_text css=”.vc_custom_1528316005240{margin-bottom: 0px !important;}”]Although you may not be a plumber by trade or plumbing aficionado, knowing the different types of plumbing pipes and their uses can help you decide which kind to get when you need to replace your old or damaged pipes. In case you’re still having your home built, having knowledge of the most popular types of pipes, their advantages and disadvantages will enable you to have a plumbing system that will work and last for a long time.

Below are the most commonly used types of plumbing pipes, their purposes and advantages:

PVC or Polyvinyl Chloride Pipe

PVC plumbing pipes are used for drain, vent, and waste lines, cold and hot potable waterlines, and for sewage applications. Their thickness and configurations vary depending on the application where it will be used. PVC pipes are light and easy to work with and install.

Rigid Copper Pipe

Copper pipes are the most traditional and popularly used plumbing pipes since they are durable, long-lasting, and corrosion-resistant. They are also the best water supply pipe option since they do not carry certain health risks that PVC pipes have. They work well with both hot and cold water.

Copper plumbing pipes, however, have to be soldered together and may require some additional fittings. As such, you or your contractor have to be good at soldering if you want to use this type of material.

PEX or Cross-linked Polyethylene Piping

PEX pipes are flexible, color-coded plastic pipes that are easy to cut and simple to connect. They are now one of the most popular plumbing pipe options used for residences and small business establishments or buildings since they require little maintenance. They are one of the strongest and most durable materials today and can thus remain leak-free for a long period of time.

Stainless Steel Pipes

Stainless steel pipes are typically used in areas subject to corrosion and near coastal areas. It is one of the most durable types of plumbing pipe materials. This type of pipe is available in both flexible and rigid varieties. If they will be attached to other types of pipes, special couplings will be needed.

Cast Iron Plumbing Pipes

Cast iron plumbing pipes are generally manufactured as bell and spigot types. Most cast iron plumbing pipes come with threaded joints but they are more expensive than the bell and spigot ones.

Cast iron pipes are heavier than any other pipes and as such, are best used for underground water distribution system. You will often see them as the main pipe on drainage or sewer systems.

Expert Fox Valley plumbers can also help you choose which type of pipe is best for your home construction or renovation project. Seasoned plumbers, such as those from Turek’s Plumbing, can have trucks stocked with all a huge variation of plumbing pipes. If you decide the job is better suited for a Fox Valley Plumber, give us a call. We have solutions that will meet your requirements, budget, and particular project.[/vc_column_text][/vc_column][vc_column width=”1/6″][/vc_column][/vc_row]

Continue Reading

Tags: , , ,
Posted in Plumbing Pipes | Comments Off on Types Of Plumbing Pipes And Their Uses