Tureks Plumbing Services Blog: Posts Tagged ‘Fox Cities Residential Plumbing’

Kitchen Sink Backing Up When Washing Laundry

Wednesday, September 29th, 2021

What to Do When Kitchen Sink Backing Up When Washing Laundry

Plumbing problems can be the worst, especially when it’s affecting several parts of your home. A kitchen sink backing up when washing laundry is definitely out of the normal. This problem can be caused by either a clogged drain or a venting issue. So, where do you start? Well, if you’re looking for a quick fix, we always recommend contacting your local plumbing company. If you’d like to try to fix this on your own, continue to read the article below!

The Location Of The Clog

All plumbing fixture drains in a residence, including the washing machine drain, must connect to a 3- or 4-inch main drain pipe that connects to a sewer or septic tank outside the home. To drain a washing machine into a kitchen sink, the kitchen sink drain must connect to the washing machine drain pipe. Our Appleton plumber says that the clog lies somewhere after the connection to the kitchen sink drain but before the connection to the other drains. Note that the water would just back up from the washing machine drain if the clog was before the kitchen sink. If the blockage occurred after the connection with other fixture drains, it would back up into the lowest fixture, which was usually a shower or toilet.

Drainage Issues

Washing machines may pump up to 15 gallons of water per minute into the drain. This is significantly quicker than any other fixtures or appliances. A drain pipe of 1 1/2 inches was thought to be adequate for earlier washing machines. However, code now requires a washing machine drain pipe size of at least 2 inches in many regions for appropriate drainage. Our friends at McQuillan Bros, who offers Twin Cities plumbing services, say that due to the grease and food that is frequently poured into them, kitchen-sink drain pipes clog more frequently than other plumbing fixtures. Due to the volume of water pumped from the washing machine, even a partial obstruction in the shared drain pipe from the kitchen sink can cause the washing machine to back up into the sink.

Ventilation Issues

If there is a gurgling sound coming from the sink drain when the washing machine drains, the backup could be caused by a venting problem. Drainage problems will occur if the washing machine or kitchen vent is run incorrectly or is too small. Similarly, if the vent is clogged, consider a straw with liquid in it. The liquid will not drain if one end of the straw is blocked. The same is true for a plumbing system. If you hear gurgling coming from the kitchen sink, it’s because the sink is being used as a vent.

Resolving the Issue

If the sink is gurgling, visually inspect the vent for blockages. A clog in a drain pipe is most likely too far away to be unplugged by plunging. At this point, if your kitchen sink is backing up when washing laundry, you should contact Tureks Plumbing. Our team of experienced plumbers will resolve the problem in no time. We offer 24/7 emergency plumbing services throughout the Fox Valley cities areas.

Tags: Fox Cities Residential Plumbing, Fox Valley Plumber, plumber in Appleton WI, plumber near me, Plumbing Company in Fox Cities, residential plumbing
Posted in Plumbing Problems | Comments Off on Kitchen Sink Backing Up When Washing Laundry

What you need to know about tankless water heaters

Saturday, June 3rd, 2017

8 Things You Need to Know About Tankless Water Heaters

Hot water is one of the most appreciated conveniences in the western world. It is essential to upholding day-to-day hygiene requirements and to wellness, especially during the chilly months.

Back in the days of old, it took a long time and much physical energy to heat enough hot water for bathing, but today, all you really have to do is turn on your faucet or shower for a steady stream. This is if you already have a water heater installed at home.

And speaking of water heaters, there are different kinds. A lot of homeowners in the Applegate and Fox Valley communities prefer tankless water heaters because these only provide hot water when needed and, therefore, are more energy-efficient. Water heaters are among the biggest energy consumers installed in most houses, but tankless water heaters don’t create the budget setback that conventional heaters do.

If you’re building a home and you’re not sure what type of water heater to use, here are eight things you need to know about tankless water heaters that will surely help you decide.

Most tankless water heaters provide hot water at a rate of two to five gallons of water per minute.
Gas-fired tankless water heaters produce higher flow rates than their electric-powered counterparts.
These are easy to install, therefore, you can place multiple units in your home.
For households that typically consume 41 gallons of hot water, tankless water heaters are more suitable to use. They are 24 to 34 percent more energy-efficient than conventional storage tank water heaters. Meanwhile, for homes that consume more hot water than that, tankless water heaters are still more energy efficient by 8 to 14 percent.
Although these are more expensive than conventional water heaters, you can recoup the cost due to its energy efficiency. You’ll see the big difference in your monthly energy bill.
Tankless water heaters also outlast storage water heaters. They can last over 20 years while storage water heaters’ functional lifespan usually only ranges between 10 to 15 years.
Your household can avoid the standby heat losses often created by some storage water heaters.
Proper installation is a must in ensuring energy efficiency, so make sure that you hire the best Fox Valley plumbers for the job.

All in all, if you want to enjoy hot water without consuming too much energy, tankless water heaters are the smart option. Implement energy-efficient practices and your home can really lower its energy expenses. Call us today to set up your appointment!

Tags: bathroom remodel in Fox Valley, Fox Cities Residential Plumbing, Turek's Plumbing, water efficiency, water heater, water heater repair
Posted in Bathroom Remodel, Breaking News, Commercial Plumbing, Emergency Plumber, Fox Valley Plumber, Kitchen Plumbing, Kitchen Remodel Planning, Water Efficiency, Water Heater, Water Heater Instillation, Water Heater Repair, Water Pressure | Comments Off on What you need to know about tankless water heaters

Why Become A Plumber?

Thursday, April 13th, 2017

There are many factors that should influence your choice of career to pursue. The most important ones include your interest and preference, skills, talents, and your financial capability, since specializing in a particular area comes with a lot of expenses.

Another essential factor that many people neglect to consider, but one that should be prioritized, is employability – will you be able to find a job immediately after you finish your studies?

Since this a key element that you should also consider, before making your decision, you need to have a good idea of the demand for your profession in the future to ensure that you won’t join the ranks of the unemployed.

Good Reasons to Become a Plumber

Whether you’ve just graduated from high school or you’re looking to switch to a new profession, you should never exclude being a skilled tradesman from your choices of possible career paths. Being a plumber, in particular, should be on top of your list.

But why become a plumber? Even if this job will require you to get your hands (and other parts of your body) dirty all the time, there are several benefits that come with this profession. These include the following:

It’s a financially rewarding and stable job.

Plumbers are one of the most highly paid tradespeople. Whether they get paid by the hour or on a contract or project basis, they are still well compensated.

In addition, there is always a demand for a plumber: after all, every residential and commercial property has a plumbing and drainage system. Once an issue arises with these systems, home and commercial property owners wouldn’t want this problem to be present for long and to blow out of proportion since it will be a source of great discomfort and stress for them. They will always call a plumber immediately. It is one of the few trades wherein you won’t have to worry about employment security or stability.

You can expect low course fees.

Plumbing courses are typically offered by vocational schools and community colleges. As such, they don’t come with steep fees. This means you won’t have to pay a huge student loan debt – a problem that many college students will have to face after they graduate.

You can start earning even while you’re still studying.

Aside from having a job waiting for you once you complete your course, even before you embark on your career, you can already get paid while under an apprenticeship program. There is no better perk for students than earning while learning all they need to know about the trade.

Possibilities for career advancement.

Since plumbing is a licensed and regulated trade, you have many opportunities to work your way up. The highest level you can obtain is the master’s rank. It is a level worth aiming for since master plumbers have a higher salary, more job flexibility, and more opportunities than other professions.

Lastly, you’ll never have to call a plumber.

When you have a plumbing problem in your home, you won’t have to call and pay a plumber to fix it; you can do it yourself. In addition, you’ll also be of great help to your family, relatives, and friends since you will be able to deal with any plumbing or drainage issue they may have as well.

Turek’s Plumbing is the best plumbing company in Appleton, WI. We offer great benefits and company culture. If you are interested in a career in plumbing, be sure to visit our employment page for more information. We are always looking for plumbers who are great at problem-solving and have a positive attitude. So call us today!

Tags: affordable bathroom remodel, bathroom plumbing, Bathroom Plumbing Problems, bathroom remodel in Fox Valley, emergency plumber, Fox Cities Residential Plumbing, Fox Valley Plumber, Fox Valley Plumbing Company
Posted in Commercial Plumbing, Emergency Plumber, Fox Valley Plumber, Kitchen Plumbing, Plumbing Trends, Residential Plumbing, Uncategorized | Comments Off on Why Become A Plumber?

How to Prevent Roots from Damaging Your Sewer Line

Tuesday, February 21st, 2017

How Can You Prevent Roots from Damaging Your Sewer Line?

Tree roots and other types of vegetation can be bad news for sewer lines. These do not only create blockages that affect plumbing, but they can also damage the sewer’s structure.

Any damage to sewer lines is expensive to repair and can set back property owners by thousands of dollars. Damaged sewer lines can also be the source of other inconveniences such as foul odor, pest infestation, and health issues.

It is important to prevent tree roots and vegetation from wrecking your sewer line and costing you thousands of dollars in repair and replacements. Here are some tips that can help.

Sewer Line Inspections

Regularly have professional plumbers inspect your sewer line to see if there are natural elements growing into it. Early inspection can outwork the potential big problem that can develop. This may cost you some but it’s always better (cheaper) to spend on preventive measures than repairs and replacements.

Sewer Line Locations

Do you know where the sewer lines are located? If not, call your local public works department or the national “811” hotline. They have information on all underground utilities. It’s best to get this information when you’re thinking of upgrading the landscape of your property.

Properly Prepare for Landscaping Projects

For landscaping projects, professional plumbers hired by Fox Valley and Applegate residents advise creating a barrier between trees and sewer lines. Slow release chemicals like copper sulfate and potassium hydroxide can be used to discourage root development into sewer lines. Apply these chemicals near the sewers to prevent roots from growing into sewers. Another solution to try is burying wood or metal barriers a foot deeper than the pipe. You can also run them vertically next to the sewer; this will prevent roots from getting to the pipes.

Think Long Term

Plan your landscaping by opting for trees and shrubs that only have a small root ball. These won’t grow too much and make their way into sewers but they’ll do just as fine in elevating the look of your outdoor space.

Call the Professionals

If drain clogs happen quite frequently, and the usual solutions are useless or only work temporarily, don’t delay in calling Turek’s Plumbing, your local Fox Cities plumbers, for an inspection of the sewer line. Other tell-tale signs to keep an eye out for are:

Slow-flowing drains; these basically indicate that the system is having a difficult time pushing everything down.
Gurgling noises from the toilet whenever it’s flushed.
Overflow even after potent drain cleaners have been used.

Tags: cleanout, Fox Cities Residential Plumbing, main line clog, residential plumbing, roots, sewer line
Posted in Fox Valley Plumber | Comments Off on How to Prevent Roots from Damaging Your Sewer Line

A Helpful Guide to Choosing Kitchen Cabinets

Friday, January 13th, 2017

A Guide to Choosing Kitchen Cabinets

Kitchen remodeling can be fun, especially if you’re going for a completely new style that aligns with your current personal aesthetic preference. However, you need to approach the task very seriously as well because it’s important to make sure that you’re not sacrificing function for beauty.

Now, if you’re choosing kitchen cabinets to install, you need to think about this carefully; this is a piece of advice from trusted kitchen remodelers that service Applegate and Fox Valley, Wisconsin homeowners. Kitchen cabinets do not only serve as visually appealing storage for dinnerware or kitchen essentials; they are known to improve space dimensions as well.

If you have off-center built-ins in the kitchen, the strategic installation of cabinets can achieve a more balanced look for the space.

To help you choose the right kitchen cabinets to install, here is an easy guide to follow.

Take the DIY route or hire professional builders

A DIY route is advisable if you’re purchasing ready-made cabinets that you don’t intend to permanently fix to a wall. Basically, all you need to do here is to drag it to your chosen location in the kitchen. Now, if you want to fix cabinets to the wall, it’s best to let professional builders accomplish this task; ditto if you’re fitting in custom-made cabinets.

Clearly identify the cabinet design you want

Do you want framed cabinets or frameless ones? Framed cabinets are perfect if you have traditional aesthetics. Frameless cabinets are more ideal for modern and transitional designs because they have a sleek profile.

Bespoke or stock cabinets

Custom-made cabinets work best for the space you have. Opting for these can better streamline the kitchen since they will not create weird corners and awkward protrusions. They are, however, more expensive. Stock cabinets come in a variety of designs, but you need to make sure that you have the right location for them, and that you measure spaces for installation accurately so you can go with the cabinet sizes that are most appropriate to the dimensions of the space where they’ll be installed.

Study the cabinet material, especially if you’re gravitating toward stock kitchen cabinets

Of course, you need to make sure that the cabinet will be durable enough for everything that you intend to put in it. Also, the kind of material you choose can enhance the kitchen’s overall style.

Establish your budget

It’s best to work with a clear budget. This will make selection and installation a whole lot easier and organized. It can also make the process easier if there are other things that you want done in your kitchen.

Are you having trouble deciding how to move forward with your kitchen remodel? Contact the kitchen remodel pros in Fox Cities. Turek’s plumbing can answer all of the most common remodel questions.

Tags: Fox Cities Residential Plumbing, kitchen cabinets, kitchen remodel, kitchen remodel ideas, residential plumbing
Posted in Kitchen Remodel Planning | Comments Off on A Helpful Guide to Choosing Kitchen Cabinets

How to Address Low Water Pressure Issues

Wednesday, January 11th, 2017

How Should You Handle Low Water Pressure Issues?

You woke up energetic, ready to take on the day. You hop off the bed, run to the bathroom, all pumped and ready for your invigorating morning shower. You turn the shower knob… only to get water falling down in agonizingly small, slow trickles.

Low water pressure greatly reduces your daily convenience, efficiency and productivity. Since water serves a primary role in housekeeping, cleaning and personal hygiene, difficult water access can also negatively impact your health and safety. The problem can also be costly since you may be forced to rely on other products, services and additional installation, such as a new water pump, just to get the water flowing properly.

Low water pressure issues may also indicate serious problems in your plumbing and water systems. It is thus crucial to take immediate action to prevent bigger, costlier complications and to finally ensure adequate water flow in your home.

The following are some steps to take when you notice water pressure issues:

Check for leaks

The slow and scarce flow of water in your showers and faucets may be caused by a leak in your pipes. If you suspect that this is the case, turn off all taps and water-using appliances in the property. Go to your water meter to take note of the reading. Then wait for a few hours and go back to check the meter again. Compare the first and second reading to see if water use is still registering even after you have stopped using water. Call the plumber to fix the leaks.

Call your water supplier

Low water pressure may be due to an issue in the main water supply in your area. Check your water supply company’s website or call their office to confirm if there are repairs, maintenance or emergency work being conducted. Get the details on the schedule so you can plan and prepare contingency measures.

Flush mineral and debris buildup in the water mains

Another possible reason for low water pressure is the accumulation of minerals, dirt, sand and debris in your pipes and water systems. These foreign particles and pollutants can block the water flow and significantly reduce water pressure in your home. Your plumber will have the chemicals, equipment and know-how to break down and flush out the buildup.

Replace rusty pipes

If your plumbing system has been around for many years, the pipes may already be suffering from corrosion. The rust can block the smooth flow of water, making it difficult for it to reach your shower and faucets. This is a serious issue and may require complex work and the replacement of the entire system. To handle this delicate work, call your local Fox Valley plumber for help.

Tags: Fox Cities Residential Plumbing, hot water, prv, residential plumber, water pressure
Posted in Water Pressure | Comments Off on How to Address Low Water Pressure Issues

The Importance of a Water Heater Maintenance

Tuesday, December 6th, 2016

Water Heater Maintenance | Reasons to Flush Your Water Heater

Thanks to modern water systems, the water you drink is reliably clean, safe and healthy for your household’s use. That’s because the sediments and minerals you don’t want in your drink have already been filtered by the system.

But these substances do not completely disappear. Some of the materials simply settle at the bottom of the water heater tank. This residue — or more accurately, sludge — is not only extremely unappealing to look at. The worst thing about excessive sediment build-up is that it can cause several problems in the performance of your water heater which can lead you to experience extreme inconvenience and unnecessary expenses.

These problems are the main reasons you should invest in a water heater maintenance. If you want to avoid these problems, you need to make it a habit to flush your water heater on a yearly basis. Doing so will deliver the following benefits:

You can expect more reliable service from your water heater

Sediment build-up can make it difficult for your tank to heat water up. When you get rid of sludge, you enable your water heater tank to run more smoothly and reliably.

You enjoy lower energy bills

If your heater is in good condition, it won’t need to work as hard and consumer energy that’s more than necessary. You’ll see a reduction in your power bills once your water heater regains its efficient operations.

You reduce water heater damage

An overworked water heater due to excessive sediment at the bottom can easily leak, get rusty or even burst.

You avoid costly water damage

A leaking or faulty water heater tank can cause water to seep into your property. As you know, moisture and excessive water can cause water damage, weaken the structure, and ruin your walls, ceilings, electrical systems and more. You significantly lower the possibility of all these when you vigilantly flush your water heater annually.

Why get experts?

Some homeowners who are confident with doing DIY work can do it themselves. The process entails opening the drain located at the bottom of the tank and then removing the sediment by running clean water on it.

However, many prefer the more practical and efficient way: hiring professional plumbers to complete a water heater maintenance. When you get reliable experts to do it for you, you ensure thorough results. Moreover, reliable Fox Valley plumber at Turek’s Plumbing will not only focus on solving the excessive sediment issue, but they will also look into the overall condition of your water heater, ensuring good performance for the years to come.

Tags: Fox Cities Residential Plumbing, water heater, water heater flush, water heater maintenance, water heater problems, water heater replacement
Posted in Water Heater | Comments Off on The Importance of a Water Heater Maintenance

How Often Should You Have a Plumbing Inspection?

Thursday, June 9th, 2016

How Often Should You Have a Plumbing Inspection? 2021

As you know, your plumbing system is a crucial part of your home. It can be extremely frustrating when plumbing problems arise. To avoid any plumbing emergencies, we recommend hiring a professional plumbing company for a plumbing inspection. It’s important to have the system inspected regularly, even when there’s nothing wrong with it yet. In the article below, we answer “how often should you have a plumbing inspection?”

Why Plumbing Inspections Are Important

The Fox Valley plumbers that residents turn to say that a plumbing inspection is a must. Your plumbing system is constantly exposed to all kinds of elements that can corrode or create clogs in the system. Over time, this constant exposure can reduce the plumbing system’s efficiency and create problems for your household. Common plumbing problems include a toilet that won’t flush and leaky pipes that waste excessive water. Clogged drains could be breeding bacteria harmful to your family’s health. From an inspection, not only will you learn the current state or condition of your plumbing system, but you’ll also get to implement the right preventive measures to keep it in tip-top shape to serve your household well.

Q: How Often Should You Have a Plumbing Inspection?

Once a year is good enough, according to the plumbers in Fox Valley. But more often (say, seasonally) would be better, especially in Wisconsin where weather changes can really affect the efficacy of a household’s plumbing system. Over the winter, in particular, a plumbing system takes a serious beating because extreme temperatures force the system to work harder than usual, and it becomes prone to damages.

Yearly Inspection by a Plumber

With a yearly inspection, you’ll already be able to avoid big issues with your plumbing that could potentially set you back by thousands of dollars on repair and replacement. The inspector will provide you useful information on what needs to be done in order to keep the system running smoothly.

Most people decide that spring would be the perfect time for a plumbing inspection, but any other time of the year would be good as well. Basically, people often set it for spring due to concerns that winter may damage the plumbing system. If you’ve never had a plumbing inspection, our friends at McQuillan Bros, a St Paul Plumber, recommend getting on a plumbing inspection schedule immediately.

However, if you sense something wrong with your plumbing system, don’t waste time in setting a schedule for an inspection. Are you hearing banging, rattling, tapping, and squealing noises from your pipes or drains? Call your Fox Cities plumber at Turek’s Plumbing right away for a plumbing diagnosis. This will help prevent the issue from becoming a bigger problem that would be more challenging to resolve. We also offer residential plumbing services, commercial plumbing services, and drain and sewer services.

Editor’s note: This post was originally published in November 2016 and has been completely revamped and updated for accuracy and comprehensiveness.

Tags: Fox Cities Residential Plumbing, Fox Valley Plumber, plumbing inspection, Plumbing Problems, residential plumbing
Posted in Fox Valley Plumber | Comments Off on How Often Should You Have a Plumbing Inspection?