Tureks Plumbing Services Blog: Archive for the ‘Water Efficiency’ Category

Water Heater Facts Homeowners Should Know

Monday, June 12th, 2017

 Top Water Heater Facts Homeowners Should Know

Often, plenty of homeowners take their hot water heaters for granted. They usually forget about them until they run out of hot water. To beef up your knowledge about the important home features, here are some water heaters facts you may not know about:

Facts About Water Heaters

1. The idea of using a water heater first emerged in London in 1868. A painter discovered how to heat cold water by putting gas burners below the water pipes. Edwin Ruud, a Norwegian mechanical engineer, took inspiration from this idea, so he created the first tank-type water heater.
2. One-fourth of your home’s energy usage often comes from using a water heater for taking showers, doing laundry, and washing dishes.
3. On average, an American household makes use of around 80-120 gallons of hot water on a daily basis. About 6-8 gallons of water are used for showers, 15-20 gallons for taking a bath, 20-30 gallons for a load of laundry, 2 gallons of water per minute for washing the dishes, and 6-10 gallons per load if you use a dishwasher.
4. Be cautious in dealing with water heaters because in less than 5 seconds, the human skin may suffer 3rd-degree burns when it comes in contact with water that has a temperature of 140 degrees Fahrenheit or higher.
5. Tank water heaters usually last for 10-12 years while tankless water heaters can last for 18-20 years.

How Water Heaters Work

Water heaters will look like huge metal cylinders that are consigned to a basement or a laundry room. Some of the latest styles offer some interesting features. Water heaters exploit the heat rising principle so they can provide hot water to your faucet conveniently.
In a traditional water heater system, there is a big tank that will hold and heat the water. The dip tube will feed cold water to the bottom of the tank’s interior, where it starts to warm up. The heating mechanism remains on until the water reaches the desired temperature. The heated water then rises to the top of the tank. The energy used in order to keep the water hot even when no one is using it is known as standby heat loss.
For tankless water heater systems, standby heat loss is avoided because it only heats the incoming water when you need it. As such, they are also known as on-demand water heaters.
A tankless heating system makes use of a powerful heat exchanger, which is only activated by the incoming flow of water. So if you turn on your faucet, the incoming water will circulate through the exchanger, which then heats the cold water to your desired temperature. To schedule an appointment call us today!

Continue Reading

Tags: , , , , ,
Posted in Bathroom Remodel, Uncategorized, Water Efficiency, Water Heater, Water Heater Instillation, Water Heater Repair, Water Pressure | Comments Off on Water Heater Facts Homeowners Should Know

What you need to know about tankless water heaters

Saturday, June 3rd, 2017

8 Things You Need to Know About Tankless Water Heaters

Hot water is one of the most appreciated conveniences in the western world. It is essential to upholding day-to-day hygiene requirements and to wellness, especially during the chilly months.

Back in the days of old, it took a long time and much physical energy to heat enough hot water for bathing, but today, all you really have to do is turn on your faucet or shower for a steady stream. This is if you already have a water heater installed at home.

And speaking of water heaters, there are different kinds. A lot of homeowners in the Applegate and Fox Valley communities prefer tankless water heaters because these only provide hot water when needed and, therefore, are more energy-efficient. Water heaters are among the biggest energy consumers installed in most houses, but tankless water heaters don’t create the budget setback that conventional heaters do.

If you’re building a home and you’re not sure what type of water heater to use, here are eight things you need to know about tankless water heaters that will surely help you decide.

  1. Most tankless water heaters provide hot water at a rate of two to five gallons of water per minute.
  2. Gas-fired tankless water heaters produce higher flow rates than their electric-powered counterparts.
  3. These are easy to install, therefore, you can place multiple units in your home.
  4. For households that typically consume 41 gallons of hot water, tankless water heaters are more suitable to use. They are 24 to 34 percent more energy-efficient than conventional storage tank water heaters. Meanwhile, for homes that consume more hot water than that, tankless water heaters are still more energy efficient by 8 to 14 percent.
  5. Although these are more expensive than conventional water heaters, you can recoup the cost due to its energy efficiency. You’ll see the big difference in your monthly energy bill.
  6. Tankless water heaters also outlast storage water heaters. They can last over 20 years while storage water heaters’ functional lifespan usually only ranges between 10 to 15 years.
  7. Your household can avoid the standby heat losses often created by some storage water heaters.
  8. Proper installation is a must in ensuring energy efficiency, so make sure that you hire the best Fox Valley plumbers for the job.

All in all, if you want to enjoy hot water without consuming too much energy, tankless water heaters are the smart option. Implement energy-efficient practices and your home can really lower its energy expenses. Call us today to set up your appointment!

Continue Reading

Tags: , , , , ,
Posted in Bathroom Remodel, Breaking News, Commercial Plumbing, Emergency Plumber, Fox Valley Plumber, Kitchen Plumbing, Kitchen Remodel Planning, Water Efficiency, Water Heater, Water Heater Instillation, Water Heater Repair, Water Pressure | Comments Off on What you need to know about tankless water heaters

Signs My Water Pump Is Failing

Monday, May 15th, 2017

What Are the Signs My Water Pump Is Failing?

If you draw water from a well, most of the hard work of bringing water to your home is done by the water pump. However, if you come home with little to no water coming out of the faucet, one possible cause is a failing or broken water pump.

You’re probably wondering, “What are the signs that my water pump is failing?”

No water comes out of the faucet

If no water is coming out of the faucet when you turn it on, the first thing that you need to check are the pipes. Sometimes, the pipes may simply be clogged or broken.

However, if the pipes look like they are in good working order and are neither clogged nor broken, you can turn your attention to your water pump.

Loud and/or odd noises from the water tank

If you keep hearing loud and/or odd noises coming from your water pump, it is highly likely that it is about to fail anytime soon.

An increase in your electric bill

Take a look at your electric consumption over the past few months. If you think that your consumption has not changed but your bill has risen steadily over the past few weeks or months, the culprit may be your water pump.

Low water pressure

Again, you need to rule out other potential causes of low water pressure. Start by checking the condition of the pipes. Sometimes, repairing or changing broken pipes will restore normal water pressure. However, if the problem still persists, your water pump may be the main reason.

Maintaining your water pump

The price of a new water pump for your well can cost you a small fortune. Fortunately, there are a few things that you can do to get the most out of your investment.

Like other systems in your home, your water pump requires regular maintenance. Follow the manufacturer’s recommendations (including the schedule for maintenance) and have professionals inspect it at least once a year.

Consider a submersible well pump

If you have an above-ground water pump, an experienced contractor can fix it for you. However, fixing a submersible water pump will be more of a challenge because it needs to be pulled from the well.

The advantage of submersible well pumps is that these can last up to 25 years. However, this lifespan can be affected by factors like the amount of sediment and other particles in the well. Contact one of our plumbers today!

Continue Reading

Tags: , , , , , , , ,
Posted in Fox Valley Plumber, Plumbing Problems, Plumbing Trends, Remodel Contactor, Residential Plumbing, Sewer and Drain, Water Efficiency, Water Heater, Water Heater Instillation, Water Heater Repair, Water Pressure | Comments Off on Signs My Water Pump Is Failing

Common Plumbing Problems In Older Homes

Thursday, April 27th, 2017

Even in today’s digital age, many people are still looking to buy older homes. But often, these buyers are only looking at the surface of the house.

It’s important to look beyond what you can easily see — for instance, check the pipes.

Galvanized Pipes

Plenty of older homes have galvanized piping. A galvanized pipe is made of steel covered with a layer of zinc to protect it. But the zinc erodes from the piping over time, which causes the pipes to fail from the inside. In turn, this leads to different problems like stopped-up toilets and faucets and low water pressure. Sediment will fill the pipes as they corrode, thereby blocking water flow.

Concrete or Cast Iron Pipes

Some older homes have these kinds of pipes. Concrete pipes won’t deteriorate; however, they will shift and move under the home’s foundation. Cast iron pipes, on the other hand, will deteriorate over time just like the galvanized pipes but can eventually disappear.

Lead Pipes

These pipes have a lifespan of a century. Although they wear well, they may leak lead into the drinking water, causing serious health conditions to households.

Copper Pipes

These can be too pricey for home plumbing, but copper pipes are reliable and durable since they are not prone to leaking.

What else to look for?

Thoroughly check the components attached to pipes, water heaters, drains, and other plumbing systems regularly. When they are not maintained properly, huge problems can happen.

A valve on a line might look normal but it may not work well. Just because it is not leaking does not necessarily mean that there’s no problem with it.

How to Manage Plumbing Issues in Older Homes

  • Determine what kind of pipes were installed – Whether the property has copper, galvanized or concrete pipes, let a licensed plumber inspect it. This professional knows if the pipes are still fully functional or already need replacement.
  • Have a professional check the foundation of the property – Aside from the deteriorating pipes, it is also possible that tree roots have strangled the property’s sewer lines. To prevent costly future repairs, ask a certified professional to check the foundation of the sewer lines and septic systems of the property.
  • Renovate – This is the last resort in managing plumbing issues in older homes. Replace the older pipes with new plumbing systems. Also, replace or repair the property’s water lines, drains, vents, and sewer lines.

Prior to buying a house, it’s always best to know and understand the common plumbing problems in older homes. Also, you should have a professional plumber evaluate the property’s current plumbing condition – which is why you should call us today!

Continue Reading

Tags: , , , , , , ,
Posted in Bathroom Remodel, Commercial Plumbing, Fox Valley Plumber, Kitchen Plumbing, Kitchen Remodel Planning, Plumbing Problems, Plumbing Trends, Sewer and Drain, Uncategorized, Water Efficiency, Water Heater, Water Heater Instillation, Water Heater Repair, Water Pressure | Comments Off on Common Plumbing Problems In Older Homes

Things To Know When Installing A Tankless Water Heater

Tuesday, April 25th, 2017

Also known as a “demand type” water heater, a tankless water heater provides hot water only when needed. As such, it does not produce standby energy losses, which saves you money.

How a Tankless Water Heater Works

Water is being heated without the use of a storage tank. Cold water will travel from a pipe to the unit if a hot water tap is turned on. This means a tankless water heater delivers a steady supply of hot water. In other words, you do not have to wait for the storage tank to be filled up with enough hot water each time you need to use it.

Why Opt for a Tankless Water Heater?

  • Heating costs will be reduced – Enjoy monthly savings of up to 40% off your utility bill for the product’s life. Heating and reheating water in the storage tank is not required.
  • Only a small amount of space is needed – As compared to traditional water heaters, tankless water heaters will take up less space since this is just about the size of a small suitcase or even smaller.
  • Eco-friendly – Tankless water heaters are 30% more energy-efficient than tank water heaters. Maximum energy efficiency will help conserve natural resources.
  • Long-lasting – It has a longer lifespan for up to twice as much as that of the traditional water heater. This further means less waste in the landfill.
  • Clean – Avoid using water stored in a tank with accumulated rust.
  • Safe – A tankless water heater is equipped with excellent safety features to prevent injuries and burns caused by boiling water.

Installing and Maintaining Demand-Type Water Heater

Proper installation will greatly depend on different factors. These include the following:

  • Local building code requirements
  • Climate
  • Fuel type
  • Safety issues

Regular water heater maintenance is also important to extend the life of the water heater. This will also decrease loss of efficiency.

Proper installation and maintenance are very crucial to optimize the water heater’s energy efficiency. Therefore, it is best to have a licensed, skilled plumbing and heating contractor to install your tankless water heater.

Tips for Choosing the Right Contractor

  • Ask for references. Satisfied customers will give you peace of mind.
  • Request cost estimates from different contractors. Make sure that these estimates are for completed work and not just for sections of the system.
  • Check if they can get a local permit when necessary.
  • Determine if they fully understand local building codes.
  • Check if the plumbing contractor company is a member of the Better Business Bureau.
  • Sign the contract only after you’ve read and understood it.

If you’re looking to install a tankless water heater, please call us today!

Continue Reading

Tags: , , , , , , ,
Posted in Bathroom Remodel, Commercial Plumbing, Fox Valley Plumber, Kitchen Plumbing, Kitchen Remodel Planning, Plumbing Problems, Plumbing Trends, Remodel Contractor, Residential Plumbing, Uncategorized, Water Efficiency, Water Heater, Water Heater Instillation, Water Heater Repair, Water Pressure | Comments Off on Things To Know When Installing A Tankless Water Heater

When To Replace Your Hot Water Heater

Tuesday, April 11th, 2017

Once you have a water heater installed, you can rely on this piece of equipment to give you hot or temperate water whenever you need to take a bath.

But although you can expect this system to give you years and years of comfortable baths, there will come a time when it will stop working properly. And if you don’t want to be unexpectedly drenched in freezing water on a particularly cold morning, you need to know when to replace your hot water heater so that you can avoid such an uncomfortable, shocking situation.

There are certain signs that would indicate that you need to replace your water heater immediately. These include the following:

Your heater is already more than 10 years old.

Most water heaters last between 10 and 15 years. Once your system passes the 10-year mark, you will start encountering issues every now and then and you will soon find yourself spending a lot of money on repairs. Unfortunately, having your heater repaired regularly only delays the inevitable. You would do well to put all that money on a new heater.

Recurring loud, unusual noises.

As the years go by, sediment will build up in your water heater tank. You will soon hear banging or rumbling sounds from your heater due to the obstruction inside the tank.  Although a plumber will be able to remove small amounts of buildup, there will come a time when the sediment will harden and this will become too difficult to take out. Aside from causing loud noises, this hard sediment may make your heater inefficient.

Excessive leaks.

The presence of puddles of water around the heater or water seeping down the sides of the heater are usually signs that the water heater tank may be fractured. If this is the case, you will have no choice but to replace the heater to get rid of the existing leaks and prevent any further damage.

Rust around the fittings.

If the fittings around your water heater are corroded, or look rusted or worn down, this may indicate that there is an issue with the unit as a whole. Corrosion is even more likely if the leaks appear around the valves or the pipework. A professional plumber can help you decide whether it will be worth your while and your money to have the issue fixed by replacing the damaged part or if it is best to simply replace your heater with a new one.

It is producing less hot water.

Lastly, if you start noticing that there is a lack of hot water coming from your heater even if you play with the settings, this is usually a sign that your equipment is no longer working efficiently. This is especially true if you observe a sudden decrease in the amount of hot water or that your hot water never seems to get hotter than lukewarm.

You don’t have to immediately buy a new heater if you notice that your current one is starting to act up. A plumber will be able to help you decide if an old heater is worth repairing or if it is best to buy a new one. Call us today to set up an appointment!

Continue Reading

Tags: , , , , , , ,
Posted in Bathroom Remodel, Commercial Plumbing, Kitchen Plumbing, Kitchen Remodel Planning, Remodel Contractor, Residential Plumbing, Water Efficiency, Water Heater, Water Heater Instillation, Water Heater Repair, Water Pressure | Comments Off on When To Replace Your Hot Water Heater

Making the Switch to High Efficiency Plumbing Fixtures

Tuesday, August 2nd, 2016

High Efficiency Plumbing Fixtures

How High Efficiency Plumbing Fixtures Can Benefit You 

There is greater awareness of the need to conserve and protect valuable water resources within communities today. Every activity inside the household that involves the use of water can be done in a more mindful manner, using better-designed equipment and fixtures, in order to prevent wastage and contribute to the collective efforts in specific areas.

One positive practice that families can observe is to install high efficiency plumbing fixtures to replace more traditional provisions. If all households were to do this, according to the US EPA, the entire country would be able to save over 3 trillion gallons of water, plus more than $18 billion each year.

And because energy is used to treat water for better quality, deliver the water to homes, and heat the water for the residents’ use, saving water also means saving considerable amounts of energy. Just one American home out of a hundred that gets retrofitted with more water-efficient fixtures would translate to around 100 million kWh of electricity saved each year. Just imagine: That is equivalent to 80,000 tons of greenhouse gas emissions prevented from entering the environment.

With these benefits, what household would fail to see the practicality and positive environmental impact of high-efficiency fixtures? If you’re interested to transform your home into a truly environment-friendly one, then consider making the switch to high-efficiency fixtures with the help of your trusted plumbing professionals.

Here is what you need to know about plumbing fixtures with ultra-low water use:

Fixing Faucets

Conventional faucets use more than 2.5 gallons per minute (gpm). You can replace these with their high-efficiency counterparts which have flow rates that do not exceed 1.5 gpm.

Alternatively, you can modify your current faucet with a flow restrictor or aerator if you’re in need of a less expensive water-saving option.

Saving On Showers

Taking showers accounts for about 20 percent of water usage in the average household. But if the goal is to save water, it’s best to stay away from fancy showerheads that mimic rainfall, for example, which can waste several gallons of water at once.

Slash your water use when showering by replacing your old showerhead with a more efficient ultra-low-flow. A good showerhead does not use more than 2 gpm (traditional showerheads use 2.5 gpm). You’ll cut your water use down by as much as 70 percent with this move alone.

Flush Smarter

Finally, you can save more water, time and money when you choose your toilets wisely. Flushing is the one activity that consumes the greatest amount of water in the average household.

The typical toilet (generally, one that has been installed before 1994) uses over 1.6 gallons of water per flush (gpf). You have three alternative options for saving water:

  • A high-efficiency toilet does not exceed 1.28 gpf.
  • A dual-flush toilet comes with two buttons: a lower-flush button for liquid waste and a higher-flush button for solid waste.
  • A composting toilet uses little or even no water for flushing waste.

If you would like more information about high efficiency plumbing fixtures contact the Fox Cities plumbing professionals at Turek’s Plumbing.

Continue Reading

Tags: , , , ,
Posted in Water Efficiency | Comments Off on Making the Switch to High Efficiency Plumbing Fixtures

Water Efficiency Tips

Wednesday, June 15th, 2016

water efficiency tips

Water Efficiency Tips for Smart Households

With La Niña on the way, experts are not expecting the 4-year drought in California to back down anytime soon. Authorities are now busy with emergency drought regulations to mitigate the consequences of such a long-standing water crisis. Residents still have to make do with widespread water use restrictions. Thus, even if you live in a state that is unaffected by drought, it still pays to look into how you can further conserve water in your area and contribute to the benefit of the greater population.

Drought Statistics

Latest statistics from the United States Drought Monitor show that 20.46 percent of Wisconsin is considered abnormally dry – the lowest level of drought intensity – and that no one in the state is affected by it. Still, the California drought has become an eye-opener for many, and they are now researching for more water efficiency tips in the aim to change how they use water in their household.  

Implementing water conservation measures in the home can benefit the homeowner, since utility bills become lower as the consumption of water decreases. Most importantly, your water-saving habits will benefit the community – every drop matters when it comes to the smart and responsible use of water resources.

Working with the Right Plumber

To strengthen your water-saving efforts, it pays to work with an eco-friendly plumber in Fox Valley. Get help from a professional so the initiatives and projects you undertake will be sure to deliver the highest impact. With the help of a trusted plumber, you can:

  • Detect leaks and other faulty components in your plumbing system to make sure clean, useful water isn’t simply going down the drain. Keep in mind that this is how much water you are wasting: at least 20 gallon wasted daily due to a dripping faucet and thousands of gallons annually due to a leaking toilet.  
  • Once you have detected the problem areas, make the necessary repairs and upgrades.
  • Look into switching to high-efficiency fixtures such as water-saving toilets, performance pressure showers and water-efficient faucets. Additional enhancements such as installing pressure-reducing valves can also bring noticeable results.

Complement your professional water-saving plumbing projects with some behavior and lifestyle changes. These steps might be small, but working together, they can deliver outstanding results and give you the best personalized water efficiency tips.

  • Always make sure to turn faucets off when not in use. Don’t leave the water flowing while brushing your teeth, soaping the dishes or applying shampoo during a shower.
  • Look into reducing or temporarily stopping high water consumption activities, such as watering your lawn or using a hose to clean outdoor areas.
  • Strategically operate appliances that use water. For instance, choose full load when using your washing machine or dishwasher to tackle more clothes or dishes while maintaining optimal water and energy use.  

 

Continue Reading

Tags: , , , ,
Posted in Fox Valley Plumber, Water Efficiency | Comments Off on Water Efficiency Tips