Tureks Plumbing Services Blog: Archive for the ‘Sewer and Drain’ Category

Slow Drain Septic System Problems

Thursday, June 22nd, 2017

Slow Drain Septic System Problems: Signs, Causes, and How to Fix Them

The bathroom is one of the dirtiest places in your home since different types of bacteria can be found here. Once you have a drainage or septic system problem, you will consider your toilet even more unsanitary and a hassle to use.

Signs of a Septic System Issue

Septic system problems are more common in houses and buildings that have already been in use for many years. Some of the signs that indicate you already have this kind of plumbing problem are:

  • Water is draining slowly from the shower, bathtub, sink, and other areas
  • The sound of gurgling from the tub or sink when a toilet is flushed
  • Water backing up in toilets, tubs, and sinks
  • Water puddles on the grounds on your lawn
  • The smell of sewage odors outdoors

Possible Causes

There are several reasons why you have a problematic or slow drain septic system. The most common one is the overuse of the system. This means that too many people are using or too much water is being used in the household or building that the usage has gone beyond the system’s capacity.

Another common cause of this problem is the lack of or delay in inspection, maintenance, and pumping. Once your septic tank becomes full, the filter in the outlet baffle will start to plug. This plugging action will cause the water level inside the tank to rise which will restrict the flow of effluent.

Finally, your septic system may not be working properly if something is clogging the pipes or drains. Grease, food, certain sanitary products, toys, or even pieces of clothes can be stuck somewhere in the pipes and cause the slow drain or the system’s malfunction.

Getting Things Back to Normal

If the reason behind your slow drain problem is a blockage, you can remove the clog by using some tools at home. However, harder clogs and blockages will require the use of a plumbing snake; in such instances, it is best to call in experts to do the job to avoid further damaging your plumbing and septic system.

Calling in professional plumbers at the onset of a problem is always a smart idea since the contractors will know how and where to identify the issue quickly. In case you have slow draining fixtures, plumbers will check the drain-vent system. If the problem is in this area, they have the expertise, tools, and equipment to fix the issue. Also, if you already have a failed septic system, qualified plumbers will be able to detect this easily. Depending on the particular problem and design of your system, the professional plumbers will give you sound advice on whether it is best to have your system repaired or replaced.

Continue Reading

Tags: , , , , ,
Posted in Fox Valley Plumber, Plumbing Problems, Plumbing Trends, Sewer and Drain, Uncategorized | Comments Off on Slow Drain Septic System Problems

How to get jewelry out of a drain

Wednesday, May 31st, 2017
You are doing the dishes after a family meal and before you even finish, your prized piece of jewelry (a ring, bracelet, earring) slips off from you. Before you even have the time to catch it, it goes down the kitchen sink.

What should you do?

If you want to know how to get jewelry out of a drain, here are the steps that you need to follow.

Keep the area off limits

Tell the members of the household to avoid using the sink until the item has been retrieved. Otherwise, it will become increasingly difficult to get the jewelry back.

Turn off the garbage disposal and water

If water keeps on flowing down the drain, the jewelry might be pushed down further until it reaches the sewer line. When that happens, the chance of getting the item back becomes slim.

Stopping the flow of water increases the likelihood that the item goes to a more accessible area of the kitchen plumbing system, like the P-trap.

Find a magnet

Find a strong magnet and attach it to a string. After that, lower the magnet down the drain. There’s a good chance that you can get your jewelry back with this nifty trick.

Check the P-trap

If you can’t retrieve your jewelry with a magnet tied to a string, the next best thing to do is to check if the item is sitting inside the P-trap.

Before removing the different components of the P-trap, you should place a bucket underneath it to catch the water, the grime, and hopefully, the jewelry that went down the drain.

Start by removing the slip nuts and the J-shaped part of the P-trap using either a pair of pliers or a wrench. If you are lucky enough, you will be able to retrieve the lost item and you can replace the parts that you remove. But before replacing these parts, it is a good idea to clean the gunk off the pipes.

Call your Appleton Plumber 

If you are unable to successfully retrieve the item or if you do not want to gamble and test your luck with your home’s plumbing system, consider calling in the experts for help.

Preventing this plumbing emergency

If you wish to avoid the loss of a piece of prized jewelry, there are a few things that you can do.

As much as possible, remove any jewelry before doing the dishes, especially if the sink is open and unstopped.

Place the jewelry that you removed from yourself in a safe area and not over the sink. Alternatively, you can put a jewelry tray nearby.

Put drain stoppers in the kitchen and bathroom sinks. These can help prevent jewelry and other valuable items from going down the drain.

If you have a piece of jewelry trapped in your drain, please call us today for help!

Continue Reading

Tags: , , , , , , , ,
Posted in Bathroom Remodel, Breaking News, Commercial Plumbing, Emergency Plumber, Fox Valley Plumber, Plumbing Problems, Plumbing Trends, Residential Plumbing, Sewer and Drain | Comments Off on How to get jewelry out of a drain

Why Are My Drains Bubbling?

Tuesday, May 23rd, 2017

Bubbling toilets or drains explained

Whenever you use the bathroom to take care of your personal hygiene, the only sounds you would want to hear are the ones you make as you move around — the sudden rush of water as you turn on the tap, the toilet flushing, water going down the drain. If your body pipes up as well — such as your stomach rumbling thanks to the heavy meal you had earlier — that would be expected, and thus totally fine, too.

What you don’t want to hear, however, is a gurgling noise coming from various areas of the bathroom. If you hear this gurgling or bubbling noise after you use the shower, sink, or the toilet, it could mean trouble — and it’s something that you shouldn’t ignore.

Why are my drains bubbling? Here are possible answers to this question:

·         There is a blockage in your vent pipe or drain

·         A pipe may have collapsed or gotten damaged

·         There is a buildup of grease dirt or other debris in your home’s plumbing

Vent pipes are joined to the major pipes that make up your home’s plumbing. These typically end at the roof of your house. If a vent pipe is blocked by things such as accumulated dirt or debris coming from outside your house such as dead leaves, these gurgling noises indicate that air cannot escape through the vent. Instead, the air makes its way to the nearest available opening, which could be the sink in your bathroom.

If the problem is buildup in your plumbing, it means that water cannot drain properly. Typically, both water and air flow through the drain and then escape the pipes through their respective spots. When the pipes are dirty and blocked, however, the air bubbles will end up getting expelled at the nearest vent, which results in the bubbling noise.

Keep in mind, though, that if you hear the gurgling noise in every drain you can find throughout the house, then it is an indication of a much bigger blockage in the main plumbing pipe, and not in the smaller pipes attached to the drains.

How can these blocks — and consequently, the gurgling sounds — be prevented?

There are a number of things that everyone in the household can do to keep your home’s pipes free and clear:

·         Refrain from pouring or throwing anything down the drain that could cause buildup — this could be grease, hair strands, food particles, and other physical waste.

·         If the buildup already exists, you can try using chemical solutions to clean out the pipes. Make sure to use the product as directed so that they can work as intended. Also, remember to follow safety precautions when handling the chemicals.

·         Alternatively, an auger can be used to manually unclog the pipes. With sufficient force, any buildup can be broken up, but take care not to cause damage to the pipes and cause additional leaking problems.

If you’re unsure about how to perform these properly, there’s always the option of getting in touch with the plumbing specialists in your area. These professionals will know exactly how to diagnose and resolve your plumbing problems and get rid of that troublesome gurgling noise once and for all.

Continue Reading

Tags: , , , , , , ,
Posted in Bathroom Remodel, Commercial Plumbing, Emergency Plumber, Fox Valley Plumber, Plumbing Problems, Plumbing Trends, Sewer and Drain, Uncategorized | Comments Off on Why Are My Drains Bubbling?

A Guide to Locating Leaky Pipes

Thursday, May 18th, 2017

Appleton Plumber Provides Advice in Locating Leaky Pipes

Isn’t it just annoying when you find a puddle in your house and you’re not sure what or who created it? Before you conduct your sleuthing, tough, you better wipe it up first lest somebody slips on it.If water no longer reappears after wiping up the area, it’s quite likely that somebody just spilled something on the floor. However, if a new puddle forms, one of the possible causes is a leaky pipe.

If you suspect that you indeed have leaky pipes, the plumbers trusted by Fox Valley and Applegate residents have an easy guide, provided below, that you can follow to locate where the leaks are.

How to take care of the problem

  1. Wipe up the puddle again and then place paper towels or bags around the area where you found the puddle. The leak may be coming from under the floor or from the pipes located on the walls or overhead. If a drip falls, it will surely leave a spot and it’s going to be easy finding where the drip came from.
  2. Do check supply lines or water-using appliances around the area as well. They may have rips or splits, or hoses that have come loose. Turn on the water to see if there are leaks anywhere and then turn the supply off once you see a puddle forming somewhere. It helps to perform this task to establish whether your damaged plumbing system or something else causes the puddle.
  3. Once you identify where the leak is coming from, see if you can perform a remedial job that can control the leak until you can get a plumber to carry out a proper repair.
  4. Now, if you no longer see a puddle after wiping it up, this doesn’t mean that there’s no leak. Observe the area for the next few days because it may just be a slow leak and it only creates a puddle when certain activities at home increase water pressure. You also need to take care of slow leaks because over time, they may get worse. Have your plumber have a look at them so preventive work can be carried out.

If you simply cannot find where the accumulation of water is coming from, set an appointment with your plumber right away. Leaks are no light issues; they can be the cause of accidents, they can attract moisture-loving pests (cockroaches, moths, spiders, and rodents), they can encourage the proliferation of harmful bacteria and molds, they can cause damage to other structural elements of your house or to your furniture, and they can create a spike in your water bill. Contact one of our Appleton, WI plumbers today!

Continue Reading

Tags: , , , , ,
Posted in Bathroom Remodel, Commercial Plumbing, Fox Valley Plumber, Kitchen Plumbing, Kitchen Remodel Planning, Plumbing Problems, Plumbing Trends, Residential Plumbing, Sewer and Drain | Comments Off on A Guide to Locating Leaky Pipes

Signs My Water Pump Is Failing

Monday, May 15th, 2017

What Are the Signs My Water Pump Is Failing?

If you draw water from a well, most of the hard work of bringing water to your home is done by the water pump. However, if you come home with little to no water coming out of the faucet, one possible cause is a failing or broken water pump.

You’re probably wondering, “What are the signs that my water pump is failing?”

No water comes out of the faucet

If no water is coming out of the faucet when you turn it on, the first thing that you need to check are the pipes. Sometimes, the pipes may simply be clogged or broken.

However, if the pipes look like they are in good working order and are neither clogged nor broken, you can turn your attention to your water pump.

Loud and/or odd noises from the water tank

If you keep hearing loud and/or odd noises coming from your water pump, it is highly likely that it is about to fail anytime soon.

An increase in your electric bill

Take a look at your electric consumption over the past few months. If you think that your consumption has not changed but your bill has risen steadily over the past few weeks or months, the culprit may be your water pump.

Low water pressure

Again, you need to rule out other potential causes of low water pressure. Start by checking the condition of the pipes. Sometimes, repairing or changing broken pipes will restore normal water pressure. However, if the problem still persists, your water pump may be the main reason.

Maintaining your water pump

The price of a new water pump for your well can cost you a small fortune. Fortunately, there are a few things that you can do to get the most out of your investment.

Like other systems in your home, your water pump requires regular maintenance. Follow the manufacturer’s recommendations (including the schedule for maintenance) and have professionals inspect it at least once a year.

Consider a submersible well pump

If you have an above-ground water pump, an experienced contractor can fix it for you. However, fixing a submersible water pump will be more of a challenge because it needs to be pulled from the well.

The advantage of submersible well pumps is that these can last up to 25 years. However, this lifespan can be affected by factors like the amount of sediment and other particles in the well. Contact one of our plumbers today!

Continue Reading

Tags: , , , , , , , ,
Posted in Fox Valley Plumber, Plumbing Problems, Plumbing Trends, Remodel Contactor, Residential Plumbing, Sewer and Drain, Water Efficiency, Water Heater, Water Heater Instillation, Water Heater Repair, Water Pressure | Comments Off on Signs My Water Pump Is Failing

Common Plumbing Problems In Older Homes

Thursday, April 27th, 2017

Even in today’s digital age, many people are still looking to buy older homes. But often, these buyers are only looking at the surface of the house.

It’s important to look beyond what you can easily see — for instance, check the pipes.

Galvanized Pipes

Plenty of older homes have galvanized piping. A galvanized pipe is made of steel covered with a layer of zinc to protect it. But the zinc erodes from the piping over time, which causes the pipes to fail from the inside. In turn, this leads to different problems like stopped-up toilets and faucets and low water pressure. Sediment will fill the pipes as they corrode, thereby blocking water flow.

Concrete or Cast Iron Pipes

Some older homes have these kinds of pipes. Concrete pipes won’t deteriorate; however, they will shift and move under the home’s foundation. Cast iron pipes, on the other hand, will deteriorate over time just like the galvanized pipes but can eventually disappear.

Lead Pipes

These pipes have a lifespan of a century. Although they wear well, they may leak lead into the drinking water, causing serious health conditions to households.

Copper Pipes

These can be too pricey for home plumbing, but copper pipes are reliable and durable since they are not prone to leaking.

What else to look for?

Thoroughly check the components attached to pipes, water heaters, drains, and other plumbing systems regularly. When they are not maintained properly, huge problems can happen.

A valve on a line might look normal but it may not work well. Just because it is not leaking does not necessarily mean that there’s no problem with it.

How to Manage Plumbing Issues in Older Homes

  • Determine what kind of pipes were installed – Whether the property has copper, galvanized or concrete pipes, let a licensed plumber inspect it. This professional knows if the pipes are still fully functional or already need replacement.
  • Have a professional check the foundation of the property – Aside from the deteriorating pipes, it is also possible that tree roots have strangled the property’s sewer lines. To prevent costly future repairs, ask a certified professional to check the foundation of the sewer lines and septic systems of the property.
  • Renovate – This is the last resort in managing plumbing issues in older homes. Replace the older pipes with new plumbing systems. Also, replace or repair the property’s water lines, drains, vents, and sewer lines.

Prior to buying a house, it’s always best to know and understand the common plumbing problems in older homes. Also, you should have a professional plumber evaluate the property’s current plumbing condition – which is why you should call us today!

Continue Reading

Tags: , , , , , , ,
Posted in Bathroom Remodel, Commercial Plumbing, Fox Valley Plumber, Kitchen Plumbing, Kitchen Remodel Planning, Plumbing Problems, Plumbing Trends, Sewer and Drain, Uncategorized, Water Efficiency, Water Heater, Water Heater Instillation, Water Heater Repair, Water Pressure | Comments Off on Common Plumbing Problems In Older Homes

Troubleshooting Common Garbage Disposal Issues

Thursday, April 20th, 2017

Consistent sanitary practices must start in the home. Proper waste management must be observed by each and every household member, and this includes the proper usage of the garbage disposal installed under the sink.

What is a garbage disposal?

It is a device installed under the kitchen sink necessary for shredding food and grinding other waste into very tiny pieces, allowing them to pass through the sewerage system.

Essential parts and function of a garbage disposal

  • Hopper Chambers – There are two parts: the upper chamber for storing food waste straight from the sink, and the lower chamber for collecting shredded and pulverized garbage.
  • Insulated Motor – This is necessary for spinning the flywheel and impellers fast enough to obtain processed garbage. This is generally connected to the electrical switch for ease and safety.
  • Shredder Ring – This is the teeth-like shredder located right after the upper hopper chamber. It is the garbage disposal blade.
  • Flywheel and Impellers – These two main parts are responsible for bringing the food waste to the shredder ring. They work hand in hand with the shredder ring to efficiently grind and pound the garbage.
  • Reset button – This is found underneath the device. It plays a very crucial role in troubleshooting an overheated garbage disposal unit.
  • Waste Line Connector – This is where the processed garbage passes through when flushed down the sewer or septic system.

What to do when things go wrong?

When you are well-informed about the different parts and functions of your unit, you’ll generally know how to troubleshoot simple and common garbage disposal issues such as overheating, clogging or jamming, and having no power at all.

It is also recommended that you become aware of the warning signals that your disposal is unable to function properly. Signs include a foul odor, leaks, and a strange noise coming from the unit.

Determine if the problem can be fixed with simple troubleshooting or if it requires professional help.

An overheating garbage disposal unit may simply require pushing the reset button. If resetting doesn’t work, check the source of power. Something might have gone wrong with the circuit breaker.

A jammed garbage disposal can be fixed by helping the impellers move. Before touching the inside of the unit, turn off the circuit breaker for safety. Then you can proceed and try to dislodge the blockage underneath.

A foul odor indicates that the unit may be clogged or blocked. It means that the unit is unable to do its function of grinding food waste into pieces, which is why they don’t get flushed down the drain. This may also indicate that the blades or shredder aren’t sharp enough. Situations like these will need professional services.

Finally, a strange noise and water leaks must also be checked immediately by trained professionals as these signs indicate a much more serious problem. Call us today if you’re having a problem!

Continue Reading

Tags: , , , , , ,
Posted in Bathroom Remodel, Breaking News, Fox Valley Plumber, Kitchen Plumbing, Kitchen Remodel Planning, Sewer and Drain, Uncategorized | Comments Off on Troubleshooting Common Garbage Disposal Issues

Choosing a Plumber – A Few Important Things to Consider

Thursday, April 6th, 2017

Plumbing troubles and emergencies can arise when you least expect these. And when you encounter these hassles, it is crucial that prompt action be taken in order to prevent further damage.

As such, it is crucial that you call in a plumber that you trust. However, in most cases, homeowners choose a plumber as an afterthought — only when there is a problem that should be dealt with immediately.

The problem with this habit is that you could end up hurriedly scrounging the phonebook or the internet for someone to call, especially if the problem arises during the late hours. And the longer you conduct your search, the more damage the problem causes.

Here are some tips that will make choosing a plumber easier for you, regardless of whether you conduct your search online or get recommendations from friends, relatives or colleagues.

One of the first things that you should look for is a plumber’s license.

That license ensures that the plumber’s credentials are verifiable. Furthermore, a license is a sign that the plumber has invested the necessary resources that make his business legitimate.

Next, check if the plumber has insurance.

If the plumber is licensed, it is highly likely he has insurance since licensing bodies require plumbers to have insurance. However, do not automatically assume that your plumber has one and ask for proof.

Ask if the plumber offers guarantees for his work.

Although guarantees on labor and parts have become an industry standard, again, you should never simply assume.

Inquire if the plumber has received awards or has joined professional organizations. Both are proof that the plumber consistently provides quality work. But apart from quality work, your chosen plumber should also provide excellent customer service. One way to check that is to call the plumber’s office. The best ones will have a person designated to answer customer calls.

It is highly recommended that you get quotes from at least three plumbers.

Upon receipt of these quotes, compare these. Although it is tempting to choose the one that offers the lowest prices, you have to resist. Remember, you get what you pay for.

Whether you conduct your search through your network or online, do not hire a plumber without checking his online reputation. Websites like the Better Business Bureau and Yelp can provide you insights on the quality of work and customer service provided by the plumber. However, do not be discouraged by a few bad reviews. Mistakes and misunderstandings can happen and you should evaluate each individual situation as a unique case. Schedule an appointment with us today!

Continue Reading

Tags: , , , , , , , ,
Posted in Commercial Plumbing, Fox Valley Plumber, Plumbing Problems, Plumbing Trends, Sewer and Drain, Toilets, Uncategorized | Comments Off on Choosing a Plumber – A Few Important Things to Consider

Common Plumbing Issues

Wednesday, March 29th, 2017

Out of sight, out of mind.

Your home’s plumbing system is quietly working in the background, bringing you fresh water when you need it and disposing of waste water.

In an ideal scenario, your home’s plumbing system should be just that, all the time: working quietly and efficiently. But in the real world, plumbing issues can arise when you least expect them.

What are the most common plumbing problems homeowners may face at one time or another?

According to many plumbers, one of the leading issues faced by homeowners are clogs. Clogs can occur in the sewer, sink or bathtub. And although clogs may seem like a large problem, in most cases, these are not.

Toilets often back up. Your garbage disposal system can cause the sink to clog. Fortunately, most of these can be easily prevented by avoiding throwing large foreign objects into the sink, tub, and toilet. And in most cases, a clog can be undone with the aid of your trusty plunger.

However, there are instances wherein you will need some professional assistance.

For example, in severe situations, pipes may need to be replaced or walls or floorings may need to be torn down.

Another common problem homeowners face is related to the sewer and septic tank. This is one problem that, more often than not, requires the attention of professional plumbers. Apart from the stench, septic tank issues can cause damage to your property and cause health problems for your family.

Some septic tank-related problems can stem from clogs. In other cases, the problem arises form issues related to a section of the system’s pipes.

Whatever problem you may be facing, it is critical that you act as quickly as possible.

That can be as simple as using a plunger to unclog your toilet or calling in professional plumbers to assist you.

This is why it is important that you find a reliable plumber who can attend to emergencies even before you need one. Remember: Every second that your plumbing issue is left unattended and unsolved, the more likely that the problem will worsen and become complicated, resulting in further damage and added costs.

Do yourself a big favor and conduct your search for a trustworthy plumber as soon as you possibly can; this way, you won’t be scrambling to find one when you actually need a plumber, or settle for the first one who answers your call during a plumbing emergency.

Continue Reading

Tags: , , , , , , , , ,
Posted in Commercial Plumbing, Emergency Plumber, Kitchen Plumbing, Kitchen Remodel Planning, Plumbing Problems, Plumbing Trends, Residential Plumbing, Sewer and Drain, Uncategorized | Comments Off on Common Plumbing Issues

7 Ways to Effectively Prevent and Clear Clogs in Your Drain

Monday, March 27th, 2017

Clogs in the drain are household inconveniences that can be avoided. Since many are easily disgusted by the backflow of murky water caused by a clog in its usual path, it’s important to know what shouldn’t be done in order to prevent these blockages from building up inside drains.

As such, professional plumbers in Wisconsin have listed seven effective ways to prevent clogs below, as well as solutions to clogged drains that you can apply.

Don’t pour cooking grease into the sink.

It may be liquid in form when you pour it in, but an instant change in temperature can cause it to solidify. In Wisconsin, where it’s often cold, grease poured down the sink will harden in drain tubes right away, according to professional plumbers who service Applegate and Fox Valley residents.

Don’t dump coffee grounds in the sink.

Sure, these won’t harden in the drains and can be pushed down by the strong flow of water, but they can build up over time, especially if they get caught in hardened grease.

Don’t flush hair down your bathroom drains.

Hair doesn’t deteriorate and it can get entangled with the different elements present in your drain. Use a drain cover and throw away hair in the trash instead. It’s nasty, but what’s nastier is fishing out a huge hairball from your drain that’s preventing water from flushing away from your house.

If grease is already clogging your drain, the quickest solution to use is boiling hot water.

The hot temperature will turn grease into liquid again and it will mix with hot water and flow down the drain easily.

Another solution for clogs created by grease and soap scum is a solution of baking soda and vinegar.

This solution will corrode clogs and clear the drain. Not only that, baking soda and vinegar have disinfecting properties too, so if your drains are getting to be really stinky, the solution can take care of that as well.

To get rid of soap scum and hair, you can also try lye.

If you’re not familiar with lye, it’s a chemical that is used to perm the hair and it’s also used for soaps. Since it’s potent enough to alter the shape of or even burn hair, it’s effective in dissolving clogs in the drain. Make sure that you only use a small amount of lye because it’s a caustic substance.

For clogged garbage disposals, try filling an ice cube tray with equal parts of vinegar and water. Freeze the mixture of vinegar and water, and when you have ice cubes, dump them in the garbage disposal. The acidity from the vinegar will clean the drain and its chips will scrape grease off the drain walls. 

If you’re suffering from a clogged drain, schedule an appointment with us today!

Continue Reading

Tags: , , , , , ,
Posted in Commercial Plumbing, Emergency Plumber, Kitchen Plumbing, Kitchen Remodel Planning, Plumbing Problems, Plumbing Trends, Residential Plumbing, Sewer and Drain, Uncategorized | Comments Off on 7 Ways to Effectively Prevent and Clear Clogs in Your Drain