Tureks Plumbing Services Blog: Archive for the ‘Residential Plumbing’ Category

Spring Cleaning for Drains and Sewers

Wednesday, March 11th, 2020

Spring Cleaning for Drains and Sewers - Tureks Plumbing ServicesAs spring approaches, homeowners can’t help but think about spring cleaning from purging the garage to decluttering drawers. One aspect of spring cleaning that people tend to forget is the drains. Like everything else, your home’s drains also need to be cleaned.

Plumbing professionals highly recommend having your drain cleaned around this time of the year. You need to go through your home and mark every drain from the sink to bathtubs. Cleaning the drains will help decrease the chances of clogs. The following tips will help you take the right step to prevent your drains from getting clogged:

Start with the Kitchen

Your kitchen sink is put through a lot. All those plate scrapings going down the drain can accumulate and result in a clog. You want to make sure that when washing dishes, you throw any leftover food into the trash, no matter how small it may be. This will help prevent your kitchen drain from clogging. 

The Bathroom

The shower drain can clog up easily if you don’t take care of it. All the hair that gets caught up in it, as well as residues from shampoo and soap you use, can easily get caught up in the drain. To prevent this from happening, Sacramento HVAC company and plumbing experts recommend that you set a hair catcher on the drain, so it catches all the gunk. You won’t have to worry about having to get it cleaned out of the drain due to it clogging up.

Outdoor Drains

Outdoor drains are a bit trickier as they need to be inspected properly. You need to check the roots and everything around them so you can see if the pipes are damaged or not due to them as well as check for leaks. You may want to consult the professionals at Tureks Plumbing Services to inspect the drains in your home. Not only will they inspect the drains, but they can ensure that preventative measures are taken to stop clogs. 

Should you Consider Commercial Cleaners to Clean Drains?

Commercial cleaners can help you unclog drains, but they result in more problems in the long run. First off, the cleaners don’t actually tackle the main problem causing the clog, instead act as a temporary solution. The chemicals in the cleaner are also harmful to the environment. Instead of relying on commercial cleaners, contact the best plumbing company in Appleton, Wisconsin, for professional plumbing services.

Continue Reading

How to Avoid Common Plumbing Issues

Wednesday, February 5th, 2020

how to avoid common plumbing issuesPlumbing issues are enough to cause health hazards to you and your family as well as damage your property in Appleton Wisconsin. They also have the potential to cost you thousands of dollars in repairs and replacements. Usually, plumbing issues start off small and if unattended, grow to become costly affairs. It is impossible to avoid plumbing issues because your home will continue to age with time. Therefore, the best way to prevent plumbing issues from crippling your entire home is by trying as much as possible to avoid them. 

Here are some of the most common plumbing issues and the best ways to avoid them in your home. 

Leaking Faucets and Pipes 

Leaking pipes and faucets are not only a nuisance to a homeowner, but are also likely to increase your water bills. A leaking tap is usually caused by a torn, stiff or dislodged washer. The washer forms a seal when the tap is closed to prevents leaks. Consistent use tends to wear the washer thus making it ineffective. 

It is hard to prevent your tap from wearing out naturally. The only thing you can do is slow down the process by using the tap responsibly. Avoid exerting excessive pressure on your faucets during closing. Make sure to carry out regular inspections on your pipes as well to deal with any leaks as they come. 

Water Heater Problems 

Your water heater is responsible for heating all the water you need for cleaning. Water heater problems include inadequate water heating, leaking, and discolored water. They are easily recognizable and can be avoided through proper maintenance. Make sure to regularly check the pressure valve and flush the tank to get rid of sediments in a tank water heater.  

Clogged Drains and Toilets

Yet another issue you are bound to experience in your home. A clogged drain or toilet can cause a lot of health hazards to you and your family. Clogging usually happens when a foreign object partially or completely blocks the waterway leading to backups. 

You can avoid clogged drainage systems and toilets by practicing responsible waste management. Do not flush down non-dissolvable items down the toilet or your drainage system. Keep an eye on the children and stop them from flushing down their toys. Additionally, use a hair catcher in your shower to prevent bits of your hair from clogging the drainage system. 

Low Water Pressure 

Low water pressure is a nuisance because you never have enough water to carry out your house chores efficiently. It also affects other appliances in the house such as water heaters that require high pressure to activate. 

While low water pressure is usually experienced in older homes, new homes can also experience the same. It could be caused by leaking pipes and taps or a build-up of minerals and sediments in your plumbing system. 

You can avoid this problem by inspecting your plumbing system for any leaks and having a plumber fix them in time. Make sure to install a filtration system to prevent the build-up of mineral and sediments in your water system.

You will not be able to prevent all plumbing issues in your home. After all, they are not always easy to pinpoint or fix. You can, however, make a point of calling a responsible and highly qualified plumbing company in Wisconsin. At Tureks Plumbing services, we guarantee professional, ethical and honest plumbing services at any time of the day.  

 

 

Continue Reading

Why You Might Have Low Water Pressure

Wednesday, January 22nd, 2020

low water pressure - tureks plumbing servicesLow water pressure is one of the most frustrating things a homeowner can experience. It slows you down and prevents you from carrying out your chores with the efficiency you are used to. Additionally, low water pressure can affect other aspects of your home, such as water heaters that require the water pressure to work.

Low water pressure can be caused by a number of things. Identifying the problem and fixing it will allow you to enjoy your water and avoid any frustration. Here are some of the reasons contributing to your low water pressure in your home. 

Faulty Fixtures 

Fixtures such as your shower head and faucets could be faulty due to old age. Old fixtures are likely to clog due to rust or dirt. This will affect how much water flows through them. Determine which of your fixtures if faulty by testing them one by one. 

Also, make sure that you check the screen and aerator for each faucet to determine whether they are clean and clear. A clogged screen or aerator could be what is causing the fixture to act up. You can easily solve this by replacing or cleaning the fixtures to attain normal flow. 

Corrosion and Debris 

Your pipes will get old with time. For example, pipes made of galvanized steel are likely to rust. The rust accumulates and starts to collect debris over time. This lowers the water pressure. 

Corrosion and the accumulation of debris take place gradually, so you might not notice it immediately. Your plumber in Appleton will be in a better position to determine the level of rust and debris in your pipes and fix it. 

Faulty Pressure Regulator 

A pressure regulator is a bell-shaped control valve used to reduce pressure in plumbing. This reduces the amount of damage caused by high water pressure on your pipes. The pressure regulator can fail and allow the increase or decrease in water pressure. In this case, your pressure regulator will start to inhibit the pressure of the water. 

You can tell whether your pressure regulator is working properly by trying to adjust it. Any defects will affect all fixtures. Your plumber will test your regulator by connecting a water pressure gauge to the spigot that is closest to the regulator or water main and check the psi readings. A reading of below 52-75 psi means that your regulator could be failing and has to be replaced. 

Faulty Water Valve 

Your plumbing system contains two valves that control the flow of water inside your home. Both valves are found close to the meter, one on each side of the meter. Your city’s water employees can close and open the valve on the street side of the meter. 

You might experience low water pressure if either of the valves is not properly opened. It helps to check both valves, especially if your plumbing system had some work done on it. Remember not to apply too much pressure on the valve when opening it. 

One of the best ways to handle low water pressure is to involve a plumber in Appleton, Wisconsin. If you are looking for trained and qualified plumbers for your plumbing issues, look no further than Tureks Plumbing. We are dedicated to giving you value for your money. Tureks Plumbing provides 24/7 emergency plumbing services. So, just contact us and we’ll be on our way!

Continue Reading

Bathroom Problems You Can Fix Yourself

Wednesday, October 2nd, 2019

bathroom problems you can fix yourselfLike most other things, the more the bathroom is used, the more likely it is that problems will start to arise, which you will then have to fix. Whenever there is a problem in the bathroom, the first reaction of people is to call your Fox Valley plumber to get them fixed. But all problems are not of the severity that only a professional plumber can fix them. There are many bathroom problems you can fix yourself, and this can save you a lot of time and money. 

The experts at Tureks plumbing in Appleton, WI have identified some problems that do not require professional assistance. But before we get into that, you need to understand how your toilet works since most of the bathroom-related problems are toilet-related.

A Quick Understanding of How Your Toilet Works

The toilet consists of two parts: the bowl that sits on the ground, and the upper tank that holds the water until you release it when you flush the toilet. The tank is the place where most problems arise, as it contains two important valves and the handle which initiates the toilet flush. 

Plumbing Problems You May Be Able to Fix Yourself

  • Toilet not flushing: This is perhaps the most common problem and has multiple ways to fix it. First, you need to check the handle to see if it is too tight or too loose and then tighten or loosen it accordingly. You can also check on the lift chain to see if it is attached to the flapper and the lift arm correctly, then adjust it accordingly. In case the flapper is not sealing the flush valve opening, you need to replace it because it might be damaged. 
  • A leaking toilet base: Although it sounds horrible, it is not a very hard problem to fix. This problem is mostly caused due to a damaged wax ring that seals the base of the toilet to the drain opening in the floor. In order to replace the wax ring, the toilet needs to be removed, but it is not that hard. By removing the toilet, yourself and replacing the wax ring, you can save money. 
  • A clogged toilet: Another one of the more common toilet problems, this one is probably the easiest to resolve. All you need is a specialized toilet plunger with an internal cup, and you are ready to resolve this problem within a few minutes. In case the clogging is more stubborn, you can use another specialized tool called toilet auger. 
  • Water level too high: This can be caused by a damaged or an old fill valve, which might need to be cleaned or replaced. Another cause might be debris in the fill valve resulting in the malfunction of the shut-off mechanism, and the solution is to clean out that debris

 

If you are unable to fix any of these problems on your own and need assistance, contact us at Tureks Plumbing Services. Having bigger plumbing issues? We provide 24/7 emergency plumbing services across the Appleton, WI area. 

Continue Reading

Leaking Toilet Base

Wednesday, September 25th, 2019

[vc_row][vc_column][vc_column_text css=”.vc_custom_1569263090937{margin-bottom: 0px !important;}”]leaking toilet base - Plumber in Appleton WIA leaking toilet base can prove to be a big nuisance in the bathroom, especially if it is an old bathroom. A leaking toilet base is an unhygienic problem, and it can make your bathroom look not well taken care of. Another problem is that it can damage your bathroom flooring, and leave stains. To avoid severe water damage arising because of a leaking toilet base, you can address this common plumbing problem by fixing it yourself even if it the first time you are trying your hand at plumbing repairs.

Call Your Local Plumbing Experts

Our team at Tureks Plumbing Services are always ready and happy to assist you with your plumbing problems. If you don’t have time to deal with leaking toilets then give us a call at anytime. Our expert plumbers can analyze and advise you on the problem and the best possible solution for it.

How to Fix Leaking Toilet Base

  • Problem identification: To do this, you first need to dry the base, and this can be done by wiping it by a cloth or a towel. After doing this, you need to check all the connections.
  • Address the faulty connections: The bolts connecting the tank to the toilet are secured with rubber washers to prevent the water from leaking. Leakage can occur if these bolts have loosened up. Therefore if you find these bolts to be loose, you can tighten them using a screwdriver. Although you should make sure you do not overtighten the bolts because this can cause the tank to crack. You also need to make sure that the toilet is level on the floor because if it is un-level, it might break the seal. If tightening the bolts does not address the problem, then it means that the problem lies somewhere else. In that case, you may need to reach out to for our plumbing services.
  • Replace the washers: You might need to replace the washers if tightening the bolts does not solve the problem of a leaking toilet base. The washers might have worn out, and before replacing them, you will first need to stop the water source. After that, remove the bolts, dry the area, and replace the washers.
  • Replace the wax ring: If the problem still persists, it is possible it is due to a failed wax ring. The wax ring is not a very expensive replacement and will therefore not cause a serious dent in your pocket. But on the flip side, it might take a few hours of your time to replace as you will have to remove the toilet in order to replace it. After removing the toilet base, you need to remove the old ring and replace it after thoroughly cleaning the surroundings. After this replacement, you can install the toilet back into its original place. If this sounds like too much work, we will gladly do it for you, just fill out a plumbing service request.
  • Replace the toilet altogether: If all of the methods mentioned above have failed, there is only one option left, and that is to remove and replace the whole toilet itself.

[/vc_column_text][/vc_column][/vc_row]

Continue Reading

When to Replace Your Water Softener at Home

Wednesday, September 18th, 2019

How to Know When to Replace the Water Softener at Home - Tureks PlumbingLike any of the other appliances that you have in your home, the water softener will also need to be replaced at some point. It is important for you to know when the time has come to replace this appliance. Most water softeners last for between 10 and 15 years, so if yours is more than a decade old, then you could consider replacing it. Apart from the age, there are other signs that you can base upon to make the decision to replace your water softener. Tureks Plumbing Services shares some of those warning signs.

Less Lather Than Expected

If you notice that you have to use more soap or shampoo in order to get enough lather while you take a bath or shower, then it may be time to replace the water softener since the current one isn’t doing a good job of softening the hard water.

Spotted or Stained Laundry

When you run your clothes through the laundry machine, and the clothes have visible white spots or stains, you can suspect that the water softener isn’t doing its work as it should and you may, therefore, need to be replaced. The spots you see are minerals that have remained after the water evaporated as your laundry dried.

This problem can also be seen on your dishes and pans since the same minerals making your clothes to look dirty are also present in the water used in the dishwasher. Consequently, if you see streaks on your dishes and other kitchenware, take that as a sign that the water softener may have become ineffective and it may be time to replace it or have a Fox Valley plumber check and repair it.

Deposits Around Faucets and Pipes

You also need to observe the pipes and faucets in your home. If you see crusty deposits on those faucets and pipes, then the water softener may not be doing its job. That chalky substance can gradually clog the pipes or even damage them.

Changes in the Taste of Water

If you have been drinking water directly from a faucet, you may start to notice that its taste changes to something you don’t like. That change may signify that the minerals which the water softener was removing are now remaining in the water because the water softener is no longer doing its work as it should. This suspicion may gain further credence if you notice any of the other signs discussed earlier.

Changes in the Water Pressure

If the water pressure at different points of use drops inexplicably, the problem may lie squarely with the malfunctioning water softener. The drop in pressure may be due to the mineral deposits in hard water accumulating on the walls of the pipes to the extent that water cannot flow through easily. Fox Valley plumbers advise that it is much better, in the long run, to replace the water softener instead of indulging in the futile task of repeatedly clearing the clogged pipes.

Too Much Salt

Older water softeners required the homeowner to keep topping up the salt that is used by the appliance to soften hard water. Appleton plumbers reveal that if you check your water softener and find that the supply of salt isn’t changing despite the water softener running, then that water softener may have reached the end of its usefulness and it may be time to replace it.

Dry and Itchy Skin

If your skin feels itchy and dry after a shower, then some dissolved minerals may be remaining in the water. This is a sign that the water softener isn’t as effective as it once was.

When to Replace Your Water Softener

The signs above are only indicative and may not be definitive proof that it is time to replace your water softener. This is because the problem may be fixed by servicing the appliance, or another cause may be responsible for the signs you see. For example, the metallic water pipes in your home may be rusty, which could explain the altered taste of the water in your home. The best way to confirm that your water softener is due for replacement is by asking an Appleton plumber from Tureks Plumbing Services to check the softener and determine whether servicing or repairing it may restore it to full functionality, or whether replacing it is the best option. Don’t live with the problems resulting from hard water flowing through your pipes, contact Tureks Plumbing Services for help today!

Continue Reading

How to Prepare Your Plumbing for Fall

Wednesday, September 11th, 2019

how to prepare your plumbing for fall - Tureks Plumbing ServicesThe weather changes that occur during autumn bring several risks for the plumbing system of your home. Preparing your plumbing for this season will help to avert many of those potential problems. The following tips provided by the experienced plumbers at Tureks Plumbing Services in Appleton, WI, will get you underway with this task.

Insulate Your Water Pipes

When a pipe freezes and bursts, the resultant damage can cost you thousands of dollars to fix. The best way that Fox Valley plumbers recommend for preventing this problem is by insulating the water pipes so that they are protected from the cold.

You can buy self-adhering pipe insulation from a plumbing supplies store near you and install this insulation yourself. All you have to do is measure the pipe you want to insulate is and then cut the appropriate length of insulating material.

To make this activity as easy as possible, experienced Appleton plumbers suggest that instead of trying to insulate all the pipes in one day, spread out this work over several days.

Pay special attention to the outdoor water pipes and those in spaces that aren’t conditioned, such as the basement, since these are most prone to freezing during cold weather.

Disconnect the Hose

Now is also the time to disconnect all the water hoses outside your home. Drain those hoses and keep them in your garage or any other sheltered place in your home. Check the faucets to which the hoses were connected and repair any leaks to those faucets before the cold weather sets in.

This is also the time to turn the shutoff valves off so that the pipes supplying the garden hoses don’t retain any water in them. Any water that remains in these pipes could freeze and make the pipe burst.

Clear the Drainpipes and Gutters

Falling leaves and other debris are a threat to the drainpipes and gutters on your home because they can cause clogs that prevent water from flowing freely from the roof and away from your house. It is therefore important for you to inspect and clean out the gutters and the drainpipes so that they can do their work when the time comes.

If you are unable to clean the gutters and drainpipes on your own due to mobility challenges or safety concerns, ask Tureks Plumbing Services for help.

Inspect the Water Heater

The onset of cold weather means that your water heater will be working extra hard to keep your household supplied with the hot water .

Appleton plumbers recommend that you inspect and service the water heater so that it is at its best before the cold weather sets in. Flush the water heater and get rid of the sediment at the bottom of the tank.

Test the pressure relief valve and confirm that it is functional. Also, look underneath the heater to confirm that there are no puddles that could suggest that the water heater is leaking.

You can also check the anode rod if you hadn’t checked and replaced it recently. This component plays an important role in preventing your water heater tank from corroding since the anode sacrifices itself so that the water heater tank can remain intact. If you have a tankless water heater, then you don’t have to worry about sacrificial anodes.

Now might be a perfect time to ask your local Fox Valley plumber to examine your water heater. Tureks Plumbing can help you with any water heater repairs or replacements that are needed. Remember, it’s best to detect these plumbing problems sooner than later.

Service the Sump Pump

The sump pump plays an important role in preventing your basement from flooding by pumping out all the water that accumulates in the sump pit. This pump and any auxiliary pump in your basement need to be at its best to cope with the potential deluge of water entering the basement when the rainy season starts.

Check the discharge line and confirm that it is clear. If you test the pump and it appears to be having a technical problem, invite a plumber from Fox Valley Plumbers to check and fix any issue it may have.

It takes a lot of skill and care to prepare your plumbing system sufficiently for fall. This task is better handled by professionals, and the experienced plumbers at Tureks Plumbing Services are at your service. Give us a call today, and we will take care of your commercial or residential plumbing needs just in time for winter. 

Continue Reading

Do I Need to Fix My Gurgling Drains?

Wednesday, September 4th, 2019

do i need to fix my gurgling drainsYou should be concerned if one or more drains in your home are emitting a gurgling sound each time that drain or another one is used. While the sound can be annoying, it is actually a good thing because it draws your attention to a developing problem. Read on and discover why drains gurgle and what you can do to fix the problem on your own before calling the experts at Tureks Plumbing Services for help.

Where Does the Gurgling Come From?

One of the most important steps, before you can fix the gurgling sound in your plumbing, is finding out where the sound is coming from. You can get answers to this question by listening carefully as you use different drains. From this observation, Fox Valley plumbers recommend that you note down the specific drain or drains exhibiting this symptom.

When Does the Gurgling Occur?

Tureks Plumbing Services also recommends that you take note of when gurgling sounds are emitted. For example, one drain may gurgle each time it is used. It is also possible for a drain to gurgle when another plumbing fixture is used. A clear example of this is when you hear gurgling in the floor drain of your bathroom when you pour water down the kitchen sink drain.

What Gurgling from One Drain Means

When you talk to an Appleton plumber about the gurgling from just one drain, he or she will immediately suspect that there is either a partial clog or blockage in that drain, or there is a malfunction in the vent of that plumbing fixture, such as the kitchen sink.

Solutions to Gurgling in One Drain

First, use a plunger to try and dislodge the clog that is blocking the single drain emitting the gurgling sound. If you try to use the drain and the problem persists, then it may be time to switch to an auger. Be careful when using the auger because any mistake that you make can result in damage to the plumbing pipe.

If you aren’t certain of your ability to accomplish this task on your own, contact a plumber in Appleton, WI for help in using an auger to safely get rid of the clog.

The second alternative solution is suitable for gurgling due to defective venting. Here, what is required is to clean the p-trap of the fixture from which the gurgling sound is originating. Access the vent and clean it so that it can start letting air into the drain as water is flowing through.

If you find that the plumbing fixture doesn’t have a vent, now is the time to call a Fox Valley plumber and ask him or her to install a vent on this particular fixture and others without vents.

What Gurgling from Multiple Drains Means

You can hear gurgling sounds from several vents in your home if the main vent of the plumbing system has a problem, such as a bird’s nest blocking it or when it is constricted by a heavy object. Alternatively, gurgling from multiple vents may also result if the main sewer line has a clog or is damaged.

Solutions to Gurgling in Multiple Drains

You may have noticed that your home has a vertical pipe that runs to the roof of the house. This pipe is the main vent of the entire plumbing system. Tureks Plumbing Services explains that once this vent is clogged, then air will be unable to enter the plumbing pipes and several drains will begin gurgling.

The fix to this problem is to access the vent on the roof and remove any clog inside that vent. You can use a thin piece of tubing to push down any debris which has entered the vent. This may also be the time to put an elevated cover or mesh on the vent opening so that tree leaves and other forms of debris don’t enter the vent in future. You might want to hire a Fox Valley plumber to perform this task if you are afraid of heights or you find climbing onto the roof too risky.

The second solution involves unclogging the main sewer pipe if the main vent has no problem but you continue to hear gurgling from different drains. If you are up to the task and you have the necessary tools, such as a plumbing snake, you can open the nearest cleanout port and push the snake into the pipe until you dislodge the clog.

Calling Professional Fox Valley Plumber

However, you are better off asking a plumber in Appleton, WI to clear the pipe. This professional will inspect the pipe using a camera and identify the kind of blockage hindering the flow of wastewater. For example, tree roots may have penetrated the pipe and partially blocked it. This inspection will enable the plumber to use the most appropriate technique to get rid of the clog so that the gurgling sounds are brought to an end.

It is vital that you resist the temptation to ignore the gurgling sound coming from a drain or several drains in your home. Any delay to address the problem can allow the situation to deteriorate and a plumbing emergency, such as a burst sewer pipe, can arise. Don’t let matters get this far. Call Tureks Plumbing Services as soon as you notice gurgling in any drain and our expert plumbers will assess and resolve the situation.

Continue Reading

Do Home Warranties Cover Sewer Line Replacement?

Wednesday, August 28th, 2019

home warranties cover sewer line replacement - Tureks Plumbing ServicesHome insurance policies usually have some significant gaps when you consider your sewer line. If that sewer line ever develops a problem, you may find yourself responsible for meeting the entire cost of the repair or replacement if you hadn’t secured insurance for this system. In this article, you will discover what you need to know as you shop for coverage for this expensive component of your home.

When It’s Worthwhile to Get Sewer Line Coverage

Tureks Plumbing Services recommends that you consider the age of your home as you decide whether to get sewer line insurance cover or not. The older the house is, the higher the risk that the sewer line will develop costly problems.

For example, homes built in the 1950s have sewer lines made from either cast iron, Orangeburg, or clay. Appleton plumbers explain that Orangeburg is the most likely to develop problems because this fibrous material is porous.

It is therefore wise to get sewer line insurance if your home is old and the sewer pipe materials are nearing the end of their service life. However, Fox Valley plumbers caution that any home, regardless of its age, is susceptible to sewer line damage. For example, the sewer line could be damaged after a bout of heavy rain that causes the soil to shift beneath the pipe. All homeowners should, therefore, consider acquiring sewer line insurance, which is customized to their specific needs.

Factors to Consider When Selecting a Sewer Line Insurance Provider

The Monthly Cost

An experienced plumber in Appleton, WI advises that homeowners should avoid acquiring sewer line insurance whose monthly cost is in excess of $20. This is because those costlier policies are harder to rationalize economically in the long-term.

For example, estimates put the average cost of sewer line repairs at $2,500 if the work involves digging up the yard. If the monthly payment is $20, then your annual fee will be $240. This translates into $2,400 in a decade. The chances are high that you may not have more than two issues in a decade that require sewer line repairs in excess of $2,500. You can see from these figures how it makes financial sense to get coverage costing less than $20 a month and how hard it gets to justify that expenditure if the monthly cost is higher.

The Deductible

A deductible refers to the out of the pocket amount of money that you are required to pay before insurance steps in when sewer line repair or replacement is done on your property. Policies with high deductibles are not advisable because the savings that you make on your monthly payments get eroded when repairs are needed.

If you can, find an insurer with a low or zero deductible so that you limit what you spend in the event that your sewer line needs to be replaced or repaired during the coverage period.

The Coverage Amount

Read the policy carefully and find out the value of the coverage offered with that policy. The larger the coverage amount, the safer you are from having to dip into your pocket when sewer line repairs come up.

Avoid the temptation of opting for bargain coverage which only covers repair costs that don’t exceed a few thousand dollars because you will have no choice but to meet the extra cost if a major repair is required.

The Limit Per Call

Read the fine print of the policy carefully regarding the amount of money mentioned in the annual coverage. For example, one policy may mention that it provides $5,000 coverage each year, but that policy limits each service call to a maximum of $2,500.

Such a policy is as good as saying that you are covered up to $2,500 each year because it is very rare that your sewer lines will suffer two major defects within one year so that you file two claims with your insurer.

To be safe, talk to a plumber in Appleton, WI about the average cost of having to conduct major repairs on your sewer line. This estimate will give you a ballpark number that you can have in mind when picking an insurer with a suitable cost limit for each service call.

Sewer Line Insurance Options

Now that you have established what you should look for when buying sewer line insurance cover, let us now turn to where or what form such insurance can take. The following are some of the options you can explore.

A Rider on Your Home Insurance

As already mentioned, your home warranty will rarely cover sewer line repairs or replacement. This is because the sewer system is looked at as separate from the main home, so it is excluded in the coverage for the home. However, you can acquire a rider to that policy so that the sewer line is also covered.

A Standalone Sewer Line Policy

If you assess the rider being offered by your home insurance cover and it falls short on the desirable attributes discussed earlier, you may have to consider shopping for a separate provider for this needed warranty. Some insurers specialize in this kind of cover, while others have it as part of a range of insurance services that they offer. Explore all the options available and select the one which will address your specific needs.

Sewer Line Cover Through the Utility Company

Another option that you could look into is the possibility of getting sewer line coverage through the utility company in your area. Fox Valley plumbers report that it is becoming increasingly common for municipal authorities to partner with insurance providers to enable homeowners to get insurance for their sewer and water lines. The biggest benefit of getting such a policy is that you will pay the monthly premium with your water bill, so you will have less paperwork to deal with.

All insurance policies are unique, so it is imperative that you do your homework sufficiently before you put pen to paper. If you still have questions, talk to your insurance broker for professional advice. Needless to say, contact Tureks Plumbing Services if the sewer line or any component of the plumbing system develops a problem and you want the problem fixed professionally and affordably.

Continue Reading

How to Upgrade Your Shower for a Spa-Like Experience

Thursday, May 9th, 2019

how to upgrade your shower for a spa-like experience

How to Upgrade Your Shower for a Spa-Like Experience

Even within the same household, it isn’t uncommon to find differences in people’s shower preferences. For example, you may want a drenching pour of warm water on your tired body or you may want your aching back to be soothed by a jet of cold water. How can all these interests be catered when upgrading your shower? The experts at Tureks Plumbing Services offer the following ideas to help you to design the shower experience of your dreams.

Think Carefully About the Showerhead You Install

The nearly endless variety of showerheads on the market can be grouped into four major categories (handheld showerheads, body spray panels, rain showers, and standard wall-mounted showerheads).

If you want to control the direction and height of the water as you shower, Fox Valley plumbers suggest that you buy a handheld showerhead. Conversely, if you prefer water to rain down on you from above, then buy a rain showerhead. In short, let your preferences guide you as you select one of the shower types on the market.

Actually, there are products which combine different ways of getting water onto your body as you shower. For example, one model may have both a handheld showerhead and a rain showerhead.

Think Technology

It is also possible to make your shower experience more luxurious and convenient by selecting products that have the appropriate technology. For example, Fox Valley plumbers have installed showerheads that allow users to switch from one spray pattern to another by just tapping the showerhead.

You can also get a showerhead that comes with a small remote so that you or your family members can avoid the necessity of reaching up to tap the showerhead. This feature is especially useful if you have young kids or an elderly family member who has mobility challenges. It can also be a good way to age-proof your shower.

Pay Attention to the Shower Stall

The design of the shower stall has a big effect in determining what kind of shower experience you will have, according to a plumber in Appleton, WI.  For example, a shower stall with a half-glass wall wouldn’t allow a person who likes splashing water around to enjoy taking a shower. A shower stall with a full-glass surround is a better option for such an individual since there will be no restriction on how splashy they get when taking a shower.

The experienced plumbers at Tureks Plumbing Services also recommend that you think about usability and safety when you are having a shower stall designed for your home. For instance, curved surfaces remove the risk of being injured by sharp edges. Curved surfaces also reduce the likelihood that mold will grow in the nooks created by sharp edges.

Explore Different Finishes

The finish that you select for your shower can also add to or detract from the shower experience. For example, a dash of color can stamp your bubbly personality on the bathroom and lift your spirits each time you use this space. Small tiles will assure you of better stability if you are consumed by the fear of slipping as you walk after taking a shower.

As you choose the finish for the bathroom, don’t neglect to consider how easy it will be for you to clean those surfaces. For instance, larger tiles mean fewer grout lines that will need to be scrubbed. Similarly, engineered quartz panels are easier to maintain when compared to natural stone. Luckily, manufactured products have advanced so much that it is hard to tell them apart from the natural ones by just looking, so you will not lose anything when you select natural product look-alikes if these will offer greater cleanability when compared to the natural versions.

As you can see, there is nearly no limit regarding the ways through which you can customize your shower to a spa-like experience. If you need more inspiration regarding how to take your shower experience to a higher level, talk to our professionals at Tureks Plumbing Services and they will point you in the right direction. In fact, your glorious experience will be guaranteed when you hire our team to help with the selection and installation of the different shower products.

Continue Reading