Tureks Plumbing Services Blog: Archive for the ‘Professional Plumbing Services’ Category

How Long Will My Pipes Last?

Wednesday, October 21st, 2020
how long will my pipes last - Tureks Plumbing Services

How Long Will My Pipes Last?

Plumbing has dramatically evolved over the years. Clay and lead piping were among the first materials to be used. These were used to transport water to public buildings and homes. In the early 20th century, when homes began to be built with indoor plumbing, materials such as copper, cast iron, terra-cotta, and galvanized steel were utilized. 

Until World War II, lead piping was the majority’s material of choice when it came to plumbing pipes. As awareness about lead poisoning grew, its popularity drastically declined. Post World War II brought about galvanized screw piping as the choice material for plumbing pipes in homes.

In the 1970s, copper and polybutylene grew in popularity. Currently, polybutylene is now banned by most, if not all, building codes, as research found out that the material was compromised when exposed to chlorine.  

Knowing the different types of plumbing pipes in your home ensures that you take the necessary steps to avert floods, leaks, and potential health hazards. If you’d prefer a professional’s assistance from the beginning, contact Tureks Plumbing Services. Let’s discuss the main plumbing pipes commonly found in your home.

Types of Plumbing Pipes

Copper Pipes

Two major types of copper piping can be utilized in a plumbing system. They include flexible copper tubing and rigid copper. Copper piping is usually manufactured in different sizes, the most popular ones being the 15 and 22 mm. 

Copper piping is a reliable material that can endure for more than 50 years. It is also not prone to leakage or corrosion. It will not pollute water, it can be recycled, can withstand extreme temperature changes, and since bacteria cannot flourish in the pipes, it is safe to use copper to transport drinking water. 

Polyvinylchloride Pipes (PVC)

This is a mixture of plastic and vinyl. They are mostly used for highly pressurized water. They can also be used in draining and transporting drinking water. 

PVC pipes last for an indefinite period as they are not susceptible to corrosion or rust. These pipes can also handle high water pressure as stated above and are very light, making them easy to carry and use. PVC pipes are also affordable and are offered as an economical alternative for plumbing pipes. To replace PVC pipes with CPVC pipes for the additional advantage they offer, get in touch with a Fox Valley plumbing company.

Galvanized Steel Pipes

These pipes are made of steel, which is then coated in a zinc layer to prevent rusting. However, they are rarely used these days because of their unreliability. If your home was built in the 1980s or before then, it might have galvanized piping. Consider replacing these right away. Contact Tureks Plumbing Services to replace your galvanized steel pipes.

The pipes last between 20 to 50 years before they start breaking down. They are prone to rust and corrosion, which may lead to lead contamination, which is hazardous. Mineral buildup in the pipes forms clogs that block water from flowing.

For emergency plumbing services such as burst galvanized steel pipes or pipe corrosion, contact the best plumbing company in Appleton, WI.

Cross-linked Polyethylene Pipes (PEX)

This is a relatively new material in the plumbing scene but is gaining popularity as it is being utilized in new homes. The main difference between PEX and PVC is that PEX pipes are flexible; they can make 90 degree turns without fragmenting. McQuillan Bros, a Twin Peaks plumbing repair company, says that these pipes are easy to cut and join together, making the installation process for experts like the Fox Valley plumbing company easy and quick, promoting efficiency. 

PEX pipes are completely corrosion and rust-resistant. These pipes are also able to hold out against extreme temperatures. Despite being more expensive as compared to PVC, they are still significantly more affordable than copper.

An additional advantage of these pipes is that they are made to last.

Chlorinated Polyvinyl Chloride (CPVC)

These pipes are PVC pipes, the only difference being that they are chlorinated. This makes them able to withstand temperature differences that PVC cannot.

The pipes are rust and corrosion resistant as well as lightweight, making them easy to carry and use. They withstand temperatures of up to 200 degrees, meaning they can handle and transport hot water. If you’d like CPVC pipes installed in your home, contact a plumbing company in Appleton, Wisconsin.

In any case, you should check for and remove polybutylene piping and lead piping in your house, especially if your house was constructed between the 1970s and 1990s.

Polybutylene is plastic and gray. The material is prone to breakage and is mostly found in houses located in Mid-Atlantic states, the Sun Belt, and the Pacific Northwest. If you suspect your house does have these pipes, have a Fox Valley plumber come and conduct an inspection as soon as possible.

Lead pipes, on the other hand, are dull gray and have a 100-year lifespan but are a hazardous and toxic material, especially when it leaches into your drinking water as it causes lead poisoning, the effects of which can be treated but are irreversible.

If you’re in need of plumbing services in Appleton, WI, contact a plumbing professional and have the water tested for lead. If the lead content is 15 ppb (parts per billion) or more, have a professional plumber from Tureks Plumbing Services replace your home’s pipes immediately.

Continue Reading

Tags: , , , ,
Posted in Plumbing Pipes, Plumbing Problems, Professional Plumbing Services | Comments Off on How Long Will My Pipes Last?

Plumbing Maintenance for Fall

Wednesday, September 9th, 2020

Plumbing Maintenance for Fall

The fall season brings memories of brilliant, lush colors, and cool, comfortable temperatures. It is a period of reprieve after the intense heat of summer and before the winter’s frigid cold rolls in. However, as the leaves start to fall and the heat of the summer dissipates, homeowners everywhere should be aware of how the cold of winter will affect them. The sudden drop in temperature will wreak havoc on their plumbing, especially if they are unprepared.

Although a lot of us take it for granted, plumbing plays a crucial role in modern society. It allows us to properly dispose of waste material and keep our homes clean and sanitary. That’s why plumbing maintenance is important in the weeks leading up to the winter. The prolonged cold weather can be extremely hard on your plumbing fixtures, especially if you aren’t prepared. 

If you’ve neglected regular plumbing maintenance and didn’t address minor issues throughout the year, they will most likely be compounded in the winter months. At Turek’s Plumbing Services, we are committed to keeping your plumbing in top shape all year round. But before we look at some of the ways you can prepare your plumbing for the winter, let’s discuss what the cold does to your pipes.

How Cold Weather Causes Plumbing Problems

Winter temperatures in the U.S. usually average just above freezing at 33.2 degrees Fahrenheit, but they can hit lows of 2.6 F in places like Alaska. When the temperature dips below 32 degrees Fahrenheit, the chances of exposed pipes or poorly insulated pipes in garages, basements, and crawl spaces freezing increase exponentially. And whether it’s clean water or waste material flowing through those pipes, you definitely don’t want them to burst, especially during the winter.

A burst pipe will cause water damage, requiring thousands of dollars’ worth of repairs, and it creates the perfect environment for mold and mildew to grow. What’s more, burst pipes aren’t always conspicuous, and it may be long before you actually discover it, and this may weaken structures and possibly lead to health problems. That’s why plumbers in Appleton, Wisconsin, recommend you regularly inspect pipes you suspect are at risk of freezing, especially exposed or cracked pipes in exterior walls, attics, and basements.

If there isn’t any water coming out of the faucet or it only trickles at low pressure, one of your pipes may be frozen. Also be on the lookout for:

  • Frost, on the pipe, especially those that can be seen and the ones under the sink.
  • Strange or odd smells from a faucet or drain

If you can find the spot where a pipe is frozen, you can thaw it out by applying heat on the frozen section of the pipe. Try wrapping an electronic heating pad, heat the area with a hairdryer, or use towels soaked in hot water. However, don’t use a blowtorch, kerosene heaters, a charcoal stove, or any other open flame device as they represent a severe fire hazard. If this doesn’t work, contact a plumber in Appleton, Wisconsin. Now let’s look at some plumber approved tips on plumbing maintenance as the winter approaches.

Plumbing Maintenance Tips for the Fall

Your plumbing fixtures will be especially vulnerable as the temperature drops. Here’s what you can do:

  • For outdoor hoses, the water inside them can freeze and expand in cold temperatures. This expansion will cause them and any connected pipes in the house to freeze and break. Disconnect the water hoses, drain them of any remaining water, and store them in a dry area to prevent this.
  • Outdoor faucets that leak or drip can lead to water damage and severe plumbing issues in the winter. Make sure the faucets are fixed during the fall, and once the outdoor hoses are disconnected, cover and insulate the faucets with a Styrofoam insulation kit. 
  • If your house has an interior shut off valve that is connected to the outside faucets and plumbing, Orange County plumbers recommend shutting it off and opening the outdoor faucet valve. This will ensure that there is no remaining water in the line that could freeze during the winter.
  • Make sure you insulate any pipes in non-heated areas like the crawl space or the garage. This will prevent them from freezing. 
  • At the spot where a pipe enters your home, gaps can easily develop between the pipe and the wall over time. Cold air can enter through these gaps. Gilmore Heating & Air, a heating and cooling company in Placerville, says HVAC systems work a lot harder and even freeze the pipes. Seal any gaps you find with weather stripping, caulking, and insulation.
  • Your water heater will be working a lot harder in the winter months, so make sure you completely flush it in the fall. This will remove the sediment buildup, which blocks proper heat transfer, ensuring the water heater runs more efficiently in the winter months. 
  • Additionally, make sure your sump pump is properly cleaned and insulated. This will ensure it doesn’t freeze in the cold temperatures. Appleton plumbing maintenance professionals can help if this task is difficult for you.

Take advantage of the fall to winter-proof your plumbing. Integrating these tips into your plumbing maintenance routines will make sure your plumbing operates efficiently during the coming winter months. At Turek’s Plumbing Services, we are committed to keeping your plumbing in good shape all year round. Contact us for your bathroom renovation, pipe repair, pipelining, sewer pipe repair, and trenchless pipe repair needs in Appleton Wisconsin today.

Continue Reading

Tags: , , , ,
Posted in Plumbing Problems, Plumbing Tips, Professional Plumbing Services | Comments Off on Plumbing Maintenance for Fall

How To Properly Clean Your Sink Drains

Wednesday, June 10th, 2020
Properly Clean Sink Drain- Turek's Plumbing

While you may think that your bathroom is spotlessly clean, the odors from the sink may send a contrary message. Those smells may be due to the different items, such as hair and soap residues, which gradually build up inside the drain. If these aren’t cleaned out periodically, they can accumulate to a level that results in clogs within the system. Follow the recommendations provided below by Tureks Plumbing Services, a plumbing company in Appleton, WI, to easily keep the sink drains clean.

Remove Debris on a Weekly Basis

Prevention has always been better than cure, and that’s why we at Turek’s Plumbing Services recommend that you get into a weekly habit of getting rid of debris from sink drains. Do this by removing the adjustable metal stopper and clean as far inside the drain as you can access. Clean the stopper itself as well so that it is free from debris buildups.

Use an Appropriate Drain Cleaner

Ask any Fox Valley plumber and they will caution you against using corrosive cleaning products when cleaning sink drains. This is because those corrosive products are dangerous not just for the plumbing pipes but the septic system as well.

To kill the bacteria responsible for the unwanted smells you notice, pick a biodegradable and non-corrosive pipe cleaner. Use this product as directed on the label, but in any event no more than once a month.

Turek’s Plumbing Services cautions against using antibacterial products or bleach to clean sink drains. These will harm the pipes and sewer system.

Unclog the Sink

You can use one or more of the four steps below to unclog sink drains without calling a Fox Valley plumber for help:

Use Boiling Water

Take about half a gallon of boiling water and pour it down the drain. Many of the clogs in sink drains are due to the accumulation of soap residues and some solids, such as hair, trapped in the caked residues.

For this reason, plumbing companies in Orange County, assure you that the hot water will break up many of those clogs and they will flow down the drain. 

Plunge the Drain

Tureks Plumbing Services strongly suggests that you select a plunger that can form a seal on the opening of the drain. If you aren’t sure that you have the right plunger, ask a plumber to recommend a product.

Plunge the drain five to six times while the hot water is still slowly making its way down the clogged drain. The pressure created will expedite the process of breaking up the clog.

Use Baking Soda and White Vinegar

To use this method, plumbers in Sacramento, CA from Gilmore Heating, Air & Plumbing recommend that you start by pouring approximately half a gallon of water down the drain. Wait for several minutes and plunge the drain several times to break up as much of the clog as possible.

Thereafter, pour a cup of baking soda down the drain and leave it to sit for several minutes. Now take a cup of white vinegar and pour it down the drain as well. Cover the opening of the drain immediately so that as the mixture of vinegar and baking soda foams, it is forced to move through the clog and break it up in order to flow down the drain.

Leave this mixture to sit inside the drain for at least an hour. Thereafter, get another half a gallon of hot water and rinse the drain with it. One additional reason for using vinegar is that it will remove the odors in the drain.

Snake the Sink Drain

Some deposits in the sink drain may be so stubborn that the methods above may be unable to dislodge them. For such clogs, you may need to snake the drain.

Visit a local hardware store or talk to a Fox Valley plumber to secure a drain snake. Keep inserting and retrieving the snake until the drain snake can no longer find any more debris to remove from the drain. When you get to this point, pour some water down the drain and confirm that the sink drain is now working properly.

The measures above will generally be sufficient to keep your sink drains clean and clear. However, some homeowners may notice that the drains keep developing clogs from time to time despite every effort made to prevent such an occurrence. In such a case. Contact Turek’s Plumbing Services for professional advice. Our experienced plumbers will inspect the drains and recommend the best course of action. For example, you may need to replace the old plumbing pipes with plastic ones which are less prone to clog formation. Contact us today and start enjoying trouble-free drains!

Continue Reading

Tags: , , , ,
Posted in Fox Valley Plumber, Kitchen Plumbing, Plumbing Pipes, Professional Plumbing Services, quality plumbing, Sewer and Drain | Comments Off on How To Properly Clean Your Sink Drains

Garbage Disposal FAQ

Wednesday, May 27th, 2020

Garbage Disposal FAQ

Garbage disposals are one of the unsung heroes in our homes. These appliances prevent the kitchen sink from constantly clogging up. They also make the task of washing dishes less cumbersome. These appliances are in almost all homes, but not many people fully understand how they work. Understanding how they work is important to prevent possible issues. Turek’s Plumbing Services, a plumbing company in Appleton Wisconsin, has put together this compilation of the most common questions people have about garbage disposals. Read on and get the answers to the questions you have always wanted to ask!

Is the Garbage Disposal Dangerous?

The image that many people have in their minds about garbage disposals is that this appliance is chockfull of knives and blades which are just waiting to chop anything that comes their way. This mental picture scares people so much that they don’t want to even open the garbage disposal to see what is inside!

The plumbing maintenance experts at Turek’s Plumbing Services assert that while garbage disposals have some sharp moving parts, the bulk of the work is performed by a rotating hammer that will not do much damage to your hand.

This means that you can turn the disposal off and carefully use your hand to remove an object that is stuck there.

How Can I Maintain the Garbage Disposal?

Plumbers in Sacramento, CA from Gilmore Heating, Air, & Plumbing say that there are a number of things that you can do to keep the garbage disposal working at its best. Those measures include:

  • Run it frequently so that the moving parts and other components don’t corrode or develop other defects due to long periods of disuse.
  • Leave the garbage disposal to run for a while even after it makes a sound that shows you that the garbage has been ground up. This additional run time will get rid of all food remnants and the disposal will be free from residues that can trigger corrosion, nasty odors, and other problems.
  • Speaking of smells, it is a good habit to periodically place citrus peels in the garbage disposal. The grounded peels deodorize the garbage disposal and prevent odors from developing.

Can the Garbage Disposal Affect the Dishwasher?

If you notice that the dishwasher isn’t draining properly, the garbage disposal may have some issues. For example, some people forget to remove the drain plug when they first install a new garbage disposal. Consequently, water from the dishwasher will have no channel to flow through and it will backup. 

Which Foods Shouldn’t Be Put in the Garbage Disposal?

To keep your garbage disposal running properly, there are certain foods you should never pour down the drain. Some foods will have an adverse effect on the garbage disposal or the plumbing system. Those foods include:

  • Grease. It can cool and harden, and over time, clogs will develop as more solids get trapped by the grease.
  • Fibrous foods, such as celery stalks, eggshells, corn husks and onion skins.
  • Seeds, bones, and kernels.
  • Coffee grounds.

We know that you will still have questions about your garbage disposal from time to time, and that is why at Turek’s Plumbing Services are inviting you to contact us for quality plumbing. Our experienced plumbers will give you all the information that you need to fix minor garbage disposal issues. We will handle the more complex defects so that you don’t have to worry about the plumbing system of your home. Contact us today!

Continue Reading

Tags: , , , , ,
Posted in Fox Valley Plumber, Kitchen Plumbing, Professional Plumbing Services, quality plumbing, Sewer and Drain, Uncategorized | Comments Off on Garbage Disposal FAQ

Reasons for Water Heater Leaks

Wednesday, May 20th, 2020

Reasons for Water Heater Leaks

Water heater leaks can cause inconveniences, can be costly, and can result in damage to your property. However, water heater leaks come with the added risk of being potentially fatal. It is important for you to know the best course of action to take for water heater leaks. Turek’s Plumbing Services shares what homeowners should do during water heater leaks.

Confirm That the Water Heater is Indeed Leaking

Don’t be quick to conclude that your water heater is leaking simply because you have seen some moisture around it. This is because the heater is surrounded by many pipes, fittings, and connections. The leak may originate from any one of those other elements.

To isolate the source of the leak, plumbing professionals in Appleton, WI recommend that you clean up the water underneath the water heater and then examine the water pipes, connections, and any other features near the water heater.

If you don’t see another puddle forming, then it is likely that the moisture you saw earlier was the result of normal condensation around the water heater. If you see another puddle form, but you are unable to identify an external source, it is likely the water heater.

Turn the Power Off

Once you confirm that your home or commercial water heater is leaking, Headwaters Construction Inc., a Sacramento commercial construction company, highly recommends that you quickly turn off the power to the water heater. You can do this in one of two ways, depending on the type of fuel that your water heater runs on.

  • Electric water heaters. Go to the circuit breaker box and switch off the breaker of the water heater.
  • Gas water heaters. Check on the water heater itself and locate the power switch. Turn this switch off.

Turn the Water Off

If there your home or commercial water heater is leaking, it is important for you to turn the water off immediately. Doing so will prevent further leakage occurs while you are fixing the problem. Another reason why the plumbers at Turek’s Plumbing Services recommend that you turn the water off is that the hot water from your heater can cause serious injuries to you while you try to fix the leak in the heater.

Locate and turn off the water from the cold water shutoff valve located at the top of the water heater. If it is risky for you to access this valve, then don’t sweat it. Just turn the water off from the main shutoff valve located outside your home so that you can be safe while fixing the leak.

Reasons for Water Heater Leaks

  1. Loose Connections or Fittings. The fittings and connections found on the cold water inlet, and hot water outlet side of the water heater can become loose and cause the water heater to leak. These fittings and connections are found at the top of the heater. The solution may be as simple as tightening those connections and fittings explains Sacramento, CA plumbing company, Gilmore Heating, Air, & Solar.  You should talk to a plumbing maintenance professional from Gilmore Heating, Air, & Solar to help!
  2. A Malfunctioning T&P Valve. A T&P valve is the temperature and pressure release valve on your water heater. This valve is one of the most important safety features on the water heater. It allows excess pressure to escape once the water heater exceeds the set temperature that the water should be heated. High temperature causes the pressure in the tank to get dangerously high, and the T&P valve steps in to restore the pressure and temperature to a safe level. This component of the water heater is very dangerous to troubleshoot if you aren’t a professional, so it is best to ask a plumber in Appleton, Wisconsin, for help.
  3. A Defective Drain Valve. The drain valve is located near the bottom of the water heater. Over time, this valve can deteriorate and start leaking. Fortunately, the drain valve is easy to replace or fix once it leaks, so buy a replacement valve if you check the current one and find it leaking at the point where it is connected to the water heater.
  4. A Leak Inside the Tank. If your efforts to pinpoint an external source of the leak are futile, then the problem may be within the heater tank itself. Corrosion is normally the cause of such a leak. The most viable remedy is to replace the water heater.

Call Turek’s Plumbing to Fix Water Heater Leaks

As a general rule, you should not attempt to fix a leaking water heater on your own if you aren’t a trained professional. Be cautious and call Tureks Plumbing Services for a water heater repair. Our trained Appleton, WI plumbers will inspect the heater and recommend the best course of action.

Continue Reading

Tags: , , , ,
Posted in Emergency Plumber, Fox Valley Plumber, Plumbing Problems, Professional Plumbing Services, Uncategorized | Comments Off on Reasons for Water Heater Leaks

Best Time of Year for Home Improvement Projects

Wednesday, May 13th, 2020

The Best Time of Year for Home Improvement Projects

You are not alone if you have an extensive list of home improvement projects that you are eager to get underway. As you may already know, it isn’t advisable to get all those projects started at the same time. You can plan the work in accordance with the most appropriate time for each project.

Seasonality and the weather are factors that Turek’s Plumbing Services, the best plumbing company in Appleton, Wisconsin, recommends as a way to prioritize different home remodeling projects as detailed below.

Kitchen Remodels

The kitchen is justifiably called the heart of any home, so planning to remodel this space is perfectly understandable. Not only will you increase the value of your home, but you will also make the kitchen customized to your style.

In terms of timing, kitchen remodels are best started in summer, according to Appleton kitchen remodel experts. You can plan your vacation so that you are away while the bulk of the work is done. The indoor nature of the work saves the contractor’s team from the hot weather outdoors. 

Sacramento, CA construction company, Headwaters Construction suggests saving costs by scheduling the kitchen remodel towards the end of summer when contractors’ schedules aren’t so tight.

Bathroom Renovation

Bathroom renovation can also boost the value of your home, so it is a good investment to undertake. Appleton, WI bathroom remodel professionals recommend that bathroom renovations be done during summer or early fall. Scheduling the project out of season may result in some cost savings. A typical bathroom remodel costs approximately $8,820.

Home Additions/Upgrades

If you are planning to go big on home improvement, then a home addition maybe for you. A lot of care is needed for projects costing $38,500 or more. In terms of timing, winter is a no-no for a home addition, particularly if foundation work is involved. The experienced plumbers and technicians in Appleton, WI recommend that you undertake this project in late spring or early fall. This carries the risk that work may still be ongoing during holiday festivities, so proper planning is needed to avoid such an eventuality. Our friends at LMS Garage Doors, who repair and replace garage doors, say that replacing your garage door can significantly increase the value of your home.

Deck Installation

Many homeowners are exploring the possibility of deck installation or deck expansion in order to have more access to the outdoors. A lot of people believe this project should be undertaken in summer, but such timing means that one will not enjoy the deck during this season. A better time to install a deck is towards the end of fall or early in spring. This way, the deck will be beckoning when summer sets in! The bonus of this timing is that you could also get some good deals since you will have the work done during the off-season.

HVAC Repairs

This may not be what comes to mind when you think about home improvement projects. However, this activity is a necessary to keep your home comfy throughout the year. If possible, have your home heater maintained just before summer. Also, you should repair the AC during winter when it isn’t needed. This off-season timing will help you cut costs, and technicians will be readily available. Don’t delay to call a professional should your HVAC system develop a defect during temperature extremes.

In-Ground Pool Installation

In-ground pools can cost approximately $44,575. It is important that your timing is perfect if you want to keep this cost low. Most people have their pools installed in summer, and that sets them up to incur premium labor costs since demand is high at that time. Turek’s Plumbing Services recommends that you go against the norm and have your in-ground pool installed in autumn. This will be a slower process but worth it in cost savings.

Tuckpointing and Masonry Work

As the weather changes during the year, brickwork and masonry can develop cracks. Foundation problems and water leaks may result, so you don’t want to put off this project when these defects develop. 

If you have the luxury to select the timing of the repair, spring is the best time for tuckpointing and masonry work. During fall, contractors are preoccupied with fixing chimneys, so it is harder to get hold of the best pros. Additionally, spring offers suitable weather conditions for mortar and concrete to set.

Timing is of the essence if you are planning a home improvement project. The wrong timing can make the work harder to execute, or it could even make the project more costly. It is therefore best to plan ahead, wherever possible, and select the most suitable time for each project on your list. At Turek’s Plumbing Services, we have amassed experience in undertaking kitchen remodels, bathroom remodels and plumbing works, among other types of home remodels. Contact Appleton, WI plumbing service and we will be happy to make your dream come true![/vc_column_text][/vc_column][/vc_row]

Continue Reading

Tags: , , , , ,
Posted in Bathroom Remodel, Home Remodel, Kitchen Remodel Planning, Professional Plumbing Services, Remodel Contractor | Comments Off on Best Time of Year for Home Improvement Projects

Signs Tree Roots are Interfering Your Underground Pipes

Thursday, February 27th, 2020

signs tree roots are interfering your underground pipesTrees are a great addition to your lawn or compound. Their benefits range from increasing the aesthetic value of your home to holding the soil together and preventing erosion and providing natural shade. 

However, underneath the trees are roots that could cause problems to your underground pipes. Unlike the branches and leaves which can be monitored and trimmed before causing damage, roots are often left unattended. Their growth can damage your plumbing system and cause blockages. Our friends at Gilmore Heating and Air Conditioning, a residential ac company in Placerville, add that roots can also damage your heating and cooling system if they get out of hand.

Given that you cannot see roots, how can you tell that they are interfering with your underground pipes? Below are several different signs to look for. 

Repeated Toilet Backups

Your toilet drain transports waste material which is a great source of nutrients to plants. Since roots are always using nutrients, they can invade your drainage system in search of these nutrients. Initially, the small root hairs find weak spots in your drainage system and get through. But with time, the hairs grow thicker and bigger causing blockages. 

Such a situation unchecked can cost you a lot of money to replace the damaged drainage system. 

Other signs that indicate root interference with your drainage system include: 

  • Recurrent and unexplainable clogs 
  • Gurgling sounds 
  • Slow drainage 

Blocked Water Main

Your water main is also susceptible to damage from roots. The water main feeds water into your home for various uses. Therefore, any kind of interference from the roots will affect the amount of water you get. Some of the signs to be on the lookout for include: 

  • A gradual drop in water pressure
  • Banging and gurgling sounds

Since roots take time to grow, the effect might not be easily noticeable until very late. 

Broken Pipes or Sewer lines 

As roots grow bigger, they tend to crush or break underground pipes. This is especially the case in homes whose pipes are made of concrete or clay. You might not experience such effects on your pipes if they are made of PVC since they are impervious to roots. 

Some of the most telling signs of broken pipes and sewer lines include: 

  • Low water pressure
  • Abnormal sounds such as whistling and banging from the pipes
  • Increased water bills despite no change in water usage habits
  • Odors coming from your basement or yard
  • Water puddles in your yard. This could either be clean water being fed into your house or sewage coming from your house. 

The best way to determine whether your pipes are broken is through the use of a special camera that can be snaked through the pipe to detect issues. 

Prevent Tree Roots from Damaging your Underground Pipes 

Stopping tree roots from damaging your underground pipes will not only save you money but will also save you the trouble of having to damage your yard during repairs and replacements. You can do this through 

  • Considering your pipes and sewer lines before planting your tree. Avoid planting your trees around them. 
  • Find out what kind of roots your trees have. Avoid those with aggressive root systems. 

And if you have trees already, the best way to ensure that their roots do not interfere with your underground pipes in Appleton Wisconsin is by calling Tureks, your number one plumbing solution. Contact us today so we can inspect your roots and drains!

 

Continue Reading

Tags: , , , ,
Posted in Emergency Plumber, Plumbing Pipes, Plumbing Problems, Professional Plumbing Services, Repiping Services, Sewer and Drain | Comments Off on Signs Tree Roots are Interfering Your Underground Pipes

Traits You Should Look For in a Plumber

Thursday, February 20th, 2020

traits you should look for in a plumberA plumber is one of the most important people to work with during your home maintenance routines. Their work is to ensure that everything in your plumbing system flows smoothly, so to speak. They are usually the first people you call whenever you encounter issues such as clogs, leaks, and other assorted issues such as faulty water heaters. 

For a successful interaction between you and your plumber, you need to be sure that they are up for the task. Here are a number of things you can look for in your plumber to determine whether they are fit to work in your house. 

Experience

Papers are not enough to make a plumber qualified to work on your home. Your plumber needs experience as well. Experience allows them to pinpoint issues and fix them fast enough thus allowing you to go back to your normal routines. 

Safety 

Every skilled tradesman understands the importance of safety when working. Your plumber should prioritize safety by employing safe practices and procedures when working. This prevents the plumber you and your family members from getting injured. 

Physical Health 

Plumbers need to work in different situations that are physically tasking. For example, some work will require them to get on the roof and safely work from there. Other times they will have to crouch for long hours in order to produce good results. Your plumber should be in good shape to reduce the risk of injury. 

Communication Skills 

Communication is one of the most important skills to have. Whether you’re a student, an employee, an HVAC company, or a plumber. We asked the best residential ac company in Placerville, Gilmore Heating Air, and Solar, how important communication is in a home service business. The Sacramento HVAC professionals stress the importance of effective communication before, during, and after services. Your plumber needs to communicate effectively in order to fix your problems. That means being able to listen attentively and understand what you need. They should also be able to properly explain things to you as a homeowner. 

Good Work Ethic 

Does your plumber get to work on time? Plumbing services performed usually cripple the whole workflow inside your home. You might find yourself unable to use water due to these issues. Your plumber should get to you in time to solve the issues and allow you to get back to your normal living. Additionally, punctuality is one way of offering great customer service. 

Another good work ethic indicator is the ability to fulfill promises. You plumber should be able to lay down achievable promises and actually work towards achieving them. They should also treat you with respect as their client at all times. A good work ethic is one way to guarantee quality service. 

Insurance 

Find out whether your plumber is insured. Plumbers are required to get insurance to a certain amount which helps cover costs to any unforeseeable damage to your plumbing system while they work for you. This will ensure that should such an eventuality happen, both you and your plumber will not encounter a lot of problems. 

Proper registration

Is your plumber a registered professional? You are more likely to trust your plumber if they are registered with the relevant authorities. This shows that they have passed the required qualifications to practice as tradesmen in Appleton Wisconsin. 

You do not have to worry about getting a qualified plumber in Appleton. At Tureks Plumbing Company in Appleton Wisconsin, we endeavor to provide our customers with the best services at any time of the year. 

Continue Reading

Tags: , , , ,
Posted in Commercial Plumbing, Emergency Plumber, Kitchen Plumbing, Plumbing Tips, Professional Plumbing Services | Comments Off on Traits You Should Look For in a Plumber

How to Avoid Common Plumbing Issues

Wednesday, February 5th, 2020

how to avoid common plumbing issuesPlumbing issues are enough to cause health hazards to you and your family as well as damage your property in Appleton Wisconsin. They also have the potential to cost you thousands of dollars in repairs and replacements. Usually, plumbing issues start off small and if unattended, grow to become costly affairs. It is impossible to avoid plumbing issues because your home will continue to age with time. Therefore, the best way to prevent plumbing issues from crippling your entire home is by trying as much as possible to avoid them. 

Here are some of the most common plumbing issues and the best ways to avoid them in your home. 

Leaking Faucets and Pipes 

Leaking pipes and faucets are not only a nuisance to a homeowner, but are also likely to increase your water bills. A leaking tap is usually caused by a torn, stiff or dislodged washer. The washer forms a seal when the tap is closed to prevents leaks. Consistent use tends to wear the washer thus making it ineffective. 

It is hard to prevent your tap from wearing out naturally. The only thing you can do is slow down the process by using the tap responsibly. Avoid exerting excessive pressure on your faucets during closing. Make sure to carry out regular inspections on your pipes as well to deal with any leaks as they come. 

Water Heater Problems 

Your water heater is responsible for heating all the water you need for cleaning. Water heater problems include inadequate water heating, leaking, and discolored water. They are easily recognizable and can be avoided through proper maintenance. Make sure to regularly check the pressure valve and flush the tank to get rid of sediments in a tank water heater.  

Clogged Drains and Toilets

Yet another issue you are bound to experience in your home. A clogged drain or toilet can cause a lot of health hazards to you and your family. Clogging usually happens when a foreign object partially or completely blocks the waterway leading to backups. 

You can avoid clogged drainage systems and toilets by practicing responsible waste management. Do not flush down non-dissolvable items down the toilet or your drainage system. Keep an eye on the children and stop them from flushing down their toys. Additionally, use a hair catcher in your shower to prevent bits of your hair from clogging the drainage system. 

Low Water Pressure 

Low water pressure is a nuisance because you never have enough water to carry out your house chores efficiently. It also affects other appliances in the house such as water heaters that require high pressure to activate. 

While low water pressure is usually experienced in older homes, new homes can also experience the same. It could be caused by leaking pipes and taps or a build-up of minerals and sediments in your plumbing system. 

You can avoid this problem by inspecting your plumbing system for any leaks and having a plumber fix them in time. Make sure to install a filtration system to prevent the build-up of mineral and sediments in your water system.

You will not be able to prevent all plumbing issues in your home. After all, they are not always easy to pinpoint or fix. You can, however, make a point of calling a responsible and highly qualified plumbing company in Wisconsin. At Tureks Plumbing services, we guarantee professional, ethical and honest plumbing services at any time of the day.  

 

 

Continue Reading

Tags: , , , ,
Posted in Plumbing Pipes, Plumbing Problems, Plumbing Tips, Professional Plumbing Services, Residential Plumbing | Comments Off on How to Avoid Common Plumbing Issues

Why You Might Have Low Water Pressure

Wednesday, January 22nd, 2020

low water pressure - tureks plumbing servicesLow water pressure is one of the most frustrating things a homeowner can experience. It slows you down and prevents you from carrying out your chores with the efficiency you are used to. Additionally, low water pressure can affect other aspects of your home, such as water heaters that require the water pressure to work.

Low water pressure can be caused by a number of things. Identifying the problem and fixing it will allow you to enjoy your water and avoid any frustration. Here are some of the reasons contributing to your low water pressure in your home. 

Faulty Fixtures 

Fixtures such as your shower head and faucets could be faulty due to old age. Old fixtures are likely to clog due to rust or dirt. This will affect how much water flows through them. Determine which of your fixtures if faulty by testing them one by one. 

Also, make sure that you check the screen and aerator for each faucet to determine whether they are clean and clear. A clogged screen or aerator could be what is causing the fixture to act up. You can easily solve this by replacing or cleaning the fixtures to attain normal flow. 

Corrosion and Debris 

Your pipes will get old with time. For example, pipes made of galvanized steel are likely to rust. The rust accumulates and starts to collect debris over time. This lowers the water pressure. 

Corrosion and the accumulation of debris take place gradually, so you might not notice it immediately. Your plumber in Appleton will be in a better position to determine the level of rust and debris in your pipes and fix it. 

Faulty Pressure Regulator 

A pressure regulator is a bell-shaped control valve used to reduce pressure in plumbing. This reduces the amount of damage caused by high water pressure on your pipes. The pressure regulator can fail and allow the increase or decrease in water pressure. In this case, your pressure regulator will start to inhibit the pressure of the water. 

You can tell whether your pressure regulator is working properly by trying to adjust it. Any defects will affect all fixtures. Your plumber will test your regulator by connecting a water pressure gauge to the spigot that is closest to the regulator or water main and check the psi readings. A reading of below 52-75 psi means that your regulator could be failing and has to be replaced. 

Faulty Water Valve 

Your plumbing system contains two valves that control the flow of water inside your home. Both valves are found close to the meter, one on each side of the meter. Your city’s water employees can close and open the valve on the street side of the meter. 

You might experience low water pressure if either of the valves is not properly opened. It helps to check both valves, especially if your plumbing system had some work done on it. Remember not to apply too much pressure on the valve when opening it. 

One of the best ways to handle low water pressure is to involve a plumber in Appleton, Wisconsin. If you are looking for trained and qualified plumbers for your plumbing issues, look no further than Tureks Plumbing. We are dedicated to giving you value for your money. Tureks Plumbing provides 24/7 emergency plumbing services. So, just contact us and we’ll be on our way!

Continue Reading

Tags: , , , ,
Posted in Plumbing Pipes, Plumbing Problems, Plumbing Tips, Professional Plumbing Services, Residential Plumbing, Water Efficiency | Comments Off on Why You Might Have Low Water Pressure