Tureks Plumbing Services Blog: Archive for the ‘Bathroom Remodel’ Category

Water Heater Facts Homeowners Should Know

Monday, June 12th, 2017

 Top Water Heater Facts Homeowners Should Know

Often, plenty of homeowners take their hot water heaters for granted. They usually forget about them until they run out of hot water. To beef up your knowledge about the important home features, here are some water heaters facts you may not know about:

Facts About Water Heaters

1. The idea of using a water heater first emerged in London in 1868. A painter discovered how to heat cold water by putting gas burners below the water pipes. Edwin Ruud, a Norwegian mechanical engineer, took inspiration from this idea, so he created the first tank-type water heater.
2. One-fourth of your home’s energy usage often comes from using a water heater for taking showers, doing laundry, and washing dishes.
3. On average, an American household makes use of around 80-120 gallons of hot water on a daily basis. About 6-8 gallons of water are used for showers, 15-20 gallons for taking a bath, 20-30 gallons for a load of laundry, 2 gallons of water per minute for washing the dishes, and 6-10 gallons per load if you use a dishwasher.
4. Be cautious in dealing with water heaters because in less than 5 seconds, the human skin may suffer 3rd-degree burns when it comes in contact with water that has a temperature of 140 degrees Fahrenheit or higher.
5. Tank water heaters usually last for 10-12 years while tankless water heaters can last for 18-20 years.

How Water Heaters Work

Water heaters will look like huge metal cylinders that are consigned to a basement or a laundry room. Some of the latest styles offer some interesting features. Water heaters exploit the heat rising principle so they can provide hot water to your faucet conveniently.
In a traditional water heater system, there is a big tank that will hold and heat the water. The dip tube will feed cold water to the bottom of the tank’s interior, where it starts to warm up. The heating mechanism remains on until the water reaches the desired temperature. The heated water then rises to the top of the tank. The energy used in order to keep the water hot even when no one is using it is known as standby heat loss.
For tankless water heater systems, standby heat loss is avoided because it only heats the incoming water when you need it. As such, they are also known as on-demand water heaters.
A tankless heating system makes use of a powerful heat exchanger, which is only activated by the incoming flow of water. So if you turn on your faucet, the incoming water will circulate through the exchanger, which then heats the cold water to your desired temperature. To schedule an appointment call us today!

Continue Reading

Remodeling an Old Bathroom – Your Blueprint for Success

Thursday, June 8th, 2017

Remodeling an Old Bathroom – Your Blueprint for Success

Perhaps your old bathroom is too small and you wish to have a bigger one built. Or maybe you live in an old home and you want to refresh its look by giving it a do-over, starting with the bathroom. Or perhaps, your old bathroom no longer fits your current needs.

Whatever your reason may be, remodeling an old bathroom is a serious undertaking that should be approached carefully.

Fortunately, you can eliminate some of the guesswork and hassles involved by following these tips; they have worked for other homeowners who have successfully upgraded their old bathrooms.

Use the right type of tiles

If you want bathroom tiles that are easy to clean and maintain, avoid those made with porous materials, like stone. Instead, opt for glazed or porcelain tiles.

On the other hand, if you want to boost safety, opt for tiles with matte finishes, textured surfaces, or those that contain sand in their glazes.

Keep mildew at bay with the right type of caulk

Opt for an acrylic or hybrid formula caulk which can provide protection against mildew for up to five years. Additionally, both are easy to remove.

Need a half bath?

If you want a half bath, you will need a space that measures roughly three feet by six feet. Do check your local building codes for further clarification.

Upgrade the electrical system

Take advantage of the work that will be done in your old bathroom and have its electrical system upgraded. This is particularly important if you live in a very old home. The new electrical system should be able to accommodate your gadgets and appliances.

Placement of bathroom accessories

How high should you place towel bars, robe hooks and other accessories? Broadly speaking, the towel bar should be about four feet high, the medicine cabinet about five and half feet high, and the toilet paper holder should be around six inches away from the toilet.

Leave room for accessories

If space is limited, consider adding niches where you can place toiletries. This will allow you to make efficient use of available space while leaving enough room for bathroom essentials.

Splurge on the best toilet that you can afford

If you must splurge on one thing, make it the toilet. At the very least, opt for one that has a Maximum Performance testing score of 500.

Know the pros and cons of each type of sink

If you haven’t set sights on a particular type of sink yet, study the pros and cons of each available option and weigh these against the available space as well as your needs.

When you want a warm bathroom floor

Consider investing in an electric mat which can complement your home’s heating system. You can program its thermostat to warm up the floor a few minutes before you wake up.

 If you are interested in remodeling your bathroom, call us to set up an appointment!

Continue Reading

What you need to know about tankless water heaters

Saturday, June 3rd, 2017

8 Things You Need to Know About Tankless Water Heaters

Hot water is one of the most appreciated conveniences in the western world. It is essential to upholding day-to-day hygiene requirements and to wellness, especially during the chilly months.

Back in the days of old, it took a long time and much physical energy to heat enough hot water for bathing, but today, all you really have to do is turn on your faucet or shower for a steady stream. This is if you already have a water heater installed at home.

And speaking of water heaters, there are different kinds. A lot of homeowners in the Applegate and Fox Valley communities prefer tankless water heaters because these only provide hot water when needed and, therefore, are more energy-efficient. Water heaters are among the biggest energy consumers installed in most houses, but tankless water heaters don’t create the budget setback that conventional heaters do.

If you’re building a home and you’re not sure what type of water heater to use, here are eight things you need to know about tankless water heaters that will surely help you decide.

  1. Most tankless water heaters provide hot water at a rate of two to five gallons of water per minute.
  2. Gas-fired tankless water heaters produce higher flow rates than their electric-powered counterparts.
  3. These are easy to install, therefore, you can place multiple units in your home.
  4. For households that typically consume 41 gallons of hot water, tankless water heaters are more suitable to use. They are 24 to 34 percent more energy-efficient than conventional storage tank water heaters. Meanwhile, for homes that consume more hot water than that, tankless water heaters are still more energy efficient by 8 to 14 percent.
  5. Although these are more expensive than conventional water heaters, you can recoup the cost due to its energy efficiency. You’ll see the big difference in your monthly energy bill.
  6. Tankless water heaters also outlast storage water heaters. They can last over 20 years while storage water heaters’ functional lifespan usually only ranges between 10 to 15 years.
  7. Your household can avoid the standby heat losses often created by some storage water heaters.
  8. Proper installation is a must in ensuring energy efficiency, so make sure that you hire the best Fox Valley plumbers for the job.

All in all, if you want to enjoy hot water without consuming too much energy, tankless water heaters are the smart option. Implement energy-efficient practices and your home can really lower its energy expenses. Call us today to set up your appointment!

Continue Reading

How to get jewelry out of a drain

Wednesday, May 31st, 2017
You are doing the dishes after a family meal and before you even finish, your prized piece of jewelry (a ring, bracelet, earring) slips off from you. Before you even have the time to catch it, it goes down the kitchen sink.

What should you do?

If you want to know how to get jewelry out of a drain, here are the steps that you need to follow.

Keep the area off limits

Tell the members of the household to avoid using the sink until the item has been retrieved. Otherwise, it will become increasingly difficult to get the jewelry back.

Turn off the garbage disposal and water

If water keeps on flowing down the drain, the jewelry might be pushed down further until it reaches the sewer line. When that happens, the chance of getting the item back becomes slim.

Stopping the flow of water increases the likelihood that the item goes to a more accessible area of the kitchen plumbing system, like the P-trap.

Find a magnet

Find a strong magnet and attach it to a string. After that, lower the magnet down the drain. There’s a good chance that you can get your jewelry back with this nifty trick.

Check the P-trap

If you can’t retrieve your jewelry with a magnet tied to a string, the next best thing to do is to check if the item is sitting inside the P-trap.

Before removing the different components of the P-trap, you should place a bucket underneath it to catch the water, the grime, and hopefully, the jewelry that went down the drain.

Start by removing the slip nuts and the J-shaped part of the P-trap using either a pair of pliers or a wrench. If you are lucky enough, you will be able to retrieve the lost item and you can replace the parts that you remove. But before replacing these parts, it is a good idea to clean the gunk off the pipes.

Call your Appleton Plumber 

If you are unable to successfully retrieve the item or if you do not want to gamble and test your luck with your home’s plumbing system, consider calling in the experts for help.

Preventing this plumbing emergency

If you wish to avoid the loss of a piece of prized jewelry, there are a few things that you can do.

As much as possible, remove any jewelry before doing the dishes, especially if the sink is open and unstopped.

Place the jewelry that you removed from yourself in a safe area and not over the sink. Alternatively, you can put a jewelry tray nearby.

Put drain stoppers in the kitchen and bathroom sinks. These can help prevent jewelry and other valuable items from going down the drain.

If you have a piece of jewelry trapped in your drain, please call us today for help!

Continue Reading

Why Are My Drains Bubbling?

Tuesday, May 23rd, 2017

Bubbling toilets or drains explained

Whenever you use the bathroom to take care of your personal hygiene, the only sounds you would want to hear are the ones you make as you move around — the sudden rush of water as you turn on the tap, the toilet flushing, water going down the drain. If your body pipes up as well — such as your stomach rumbling thanks to the heavy meal you had earlier — that would be expected, and thus totally fine, too.

What you don’t want to hear, however, is a gurgling noise coming from various areas of the bathroom. If you hear this gurgling or bubbling noise after you use the shower, sink, or the toilet, it could mean trouble — and it’s something that you shouldn’t ignore.

Why are my drains bubbling? Here are possible answers to this question:

·         There is a blockage in your vent pipe or drain

·         A pipe may have collapsed or gotten damaged

·         There is a buildup of grease dirt or other debris in your home’s plumbing

Vent pipes are joined to the major pipes that make up your home’s plumbing. These typically end at the roof of your house. If a vent pipe is blocked by things such as accumulated dirt or debris coming from outside your house such as dead leaves, these gurgling noises indicate that air cannot escape through the vent. Instead, the air makes its way to the nearest available opening, which could be the sink in your bathroom.

If the problem is buildup in your plumbing, it means that water cannot drain properly. Typically, both water and air flow through the drain and then escape the pipes through their respective spots. When the pipes are dirty and blocked, however, the air bubbles will end up getting expelled at the nearest vent, which results in the bubbling noise.

Keep in mind, though, that if you hear the gurgling noise in every drain you can find throughout the house, then it is an indication of a much bigger blockage in the main plumbing pipe, and not in the smaller pipes attached to the drains.

How can these blocks — and consequently, the gurgling sounds — be prevented?

There are a number of things that everyone in the household can do to keep your home’s pipes free and clear:

·         Refrain from pouring or throwing anything down the drain that could cause buildup — this could be grease, hair strands, food particles, and other physical waste.

·         If the buildup already exists, you can try using chemical solutions to clean out the pipes. Make sure to use the product as directed so that they can work as intended. Also, remember to follow safety precautions when handling the chemicals.

·         Alternatively, an auger can be used to manually unclog the pipes. With sufficient force, any buildup can be broken up, but take care not to cause damage to the pipes and cause additional leaking problems.

If you’re unsure about how to perform these properly, there’s always the option of getting in touch with the plumbing specialists in your area. These professionals will know exactly how to diagnose and resolve your plumbing problems and get rid of that troublesome gurgling noise once and for all.

Continue Reading

A Guide to Locating Leaky Pipes

Thursday, May 18th, 2017

Appleton Plumber Provides Advice in Locating Leaky Pipes

Isn’t it just annoying when you find a puddle in your house and you’re not sure what or who created it? Before you conduct your sleuthing, tough, you better wipe it up first lest somebody slips on it.If water no longer reappears after wiping up the area, it’s quite likely that somebody just spilled something on the floor. However, if a new puddle forms, one of the possible causes is a leaky pipe.

If you suspect that you indeed have leaky pipes, the plumbers trusted by Fox Valley and Applegate residents have an easy guide, provided below, that you can follow to locate where the leaks are.

How to take care of the problem

  1. Wipe up the puddle again and then place paper towels or bags around the area where you found the puddle. The leak may be coming from under the floor or from the pipes located on the walls or overhead. If a drip falls, it will surely leave a spot and it’s going to be easy finding where the drip came from.
  2. Do check supply lines or water-using appliances around the area as well. They may have rips or splits, or hoses that have come loose. Turn on the water to see if there are leaks anywhere and then turn the supply off once you see a puddle forming somewhere. It helps to perform this task to establish whether your damaged plumbing system or something else causes the puddle.
  3. Once you identify where the leak is coming from, see if you can perform a remedial job that can control the leak until you can get a plumber to carry out a proper repair.
  4. Now, if you no longer see a puddle after wiping it up, this doesn’t mean that there’s no leak. Observe the area for the next few days because it may just be a slow leak and it only creates a puddle when certain activities at home increase water pressure. You also need to take care of slow leaks because over time, they may get worse. Have your plumber have a look at them so preventive work can be carried out.

If you simply cannot find where the accumulation of water is coming from, set an appointment with your plumber right away. Leaks are no light issues; they can be the cause of accidents, they can attract moisture-loving pests (cockroaches, moths, spiders, and rodents), they can encourage the proliferation of harmful bacteria and molds, they can cause damage to other structural elements of your house or to your furniture, and they can create a spike in your water bill. Contact one of our Appleton, WI plumbers today!

Continue Reading

Benefits of Walk in Tubs for Seniors

Wednesday, May 10th, 2017

Safer, Easier Bath Time with Walk in Tubs for Seniors

Baths are dangerous places for the elderly and infirm. Slippery water, slick porcelain, thresholds that need to be stepped over — it’s a formula for disaster if you aren’t steady on your feet. Aside from adding grab bars and non-slip shower mats, it’s usually best to also install walk in bathtubs. This is one of the most common solutions in elderly and medical care facilities.

Just Lets You Walk In

Walk in tubs allow senior folk to walk straight into the tub and forgo the perilous exercise of stepping over the tub’s edge one shaky leg at a time. They go through an inwards-opening watertight door. A seat is also installed into the tub, which allows the elderly to sit comfortably while they take a bath and relax.

All these accommodations naturally make walk in bathtubs costlier than the norm. Expect price tags to start at around $2,000, with more luxurious designs going upwards of $10,000. The $8,000 difference between low and high-end walk in tubs include, but are not limited to:

  • High-speed drains
  • Shower wands
  • Complex temperature controls
  • Bubbling jets, and more

Finding the Perfect Tub to Walk Into

Walk in tubs are investments not only because they tend to be expensive; you also need to pay close attention to the design and features of your purchase. Since they’re designed specifically to meet the needs of the infirm and the elderly in the bathroom, you need to closely inspect if they meet the needs of whoever will be using them.

Consider, for instance, that some walk in tubs have narrow entrances, and the senior who will use the tub may not be able to easily navigate the entrance if it’s too narrow. Others have small ridges that you have to step over — much smaller and easier to surmount than an ordinary tub’s full height — but it could still prove to be an inconvenience. Make sure the person who will be using the walk in tub can get an opportunity to see it and try it out before purchase.

A Caveat: Walk In Tubs Require Patience

Since they have installed doors, it’s obvious that the elderly using them won’t be able to “walk into” a tub full of water. Walk in tubs are filled with the user already inside, and likewise, drained completely before the user gets out.
This means you also need to closely consider temperature controls — nobody wants to sit in an empty tub filling with cold water while waiting to bathe. Nobody wants to wait while the tub takes its time to get filled, too, so there’s another factor. In the same vein, since users can’t exit without draining the tub first, drain times should also be factored in.

Walk in tubs for seniors are a valuable and pricey investment; ask your plumber for more details.

Continue Reading

Common Plumbing Problems In Older Homes

Thursday, April 27th, 2017

Even in today’s digital age, many people are still looking to buy older homes. But often, these buyers are only looking at the surface of the house.

It’s important to look beyond what you can easily see — for instance, check the pipes.

Galvanized Pipes

Plenty of older homes have galvanized piping. A galvanized pipe is made of steel covered with a layer of zinc to protect it. But the zinc erodes from the piping over time, which causes the pipes to fail from the inside. In turn, this leads to different problems like stopped-up toilets and faucets and low water pressure. Sediment will fill the pipes as they corrode, thereby blocking water flow.

Concrete or Cast Iron Pipes

Some older homes have these kinds of pipes. Concrete pipes won’t deteriorate; however, they will shift and move under the home’s foundation. Cast iron pipes, on the other hand, will deteriorate over time just like the galvanized pipes but can eventually disappear.

Lead Pipes

These pipes have a lifespan of a century. Although they wear well, they may leak lead into the drinking water, causing serious health conditions to households.

Copper Pipes

These can be too pricey for home plumbing, but copper pipes are reliable and durable since they are not prone to leaking.

What else to look for?

Thoroughly check the components attached to pipes, water heaters, drains, and other plumbing systems regularly. When they are not maintained properly, huge problems can happen.

A valve on a line might look normal but it may not work well. Just because it is not leaking does not necessarily mean that there’s no problem with it.

How to Manage Plumbing Issues in Older Homes

  • Determine what kind of pipes were installed – Whether the property has copper, galvanized or concrete pipes, let a licensed plumber inspect it. This professional knows if the pipes are still fully functional or already need replacement.
  • Have a professional check the foundation of the property – Aside from the deteriorating pipes, it is also possible that tree roots have strangled the property’s sewer lines. To prevent costly future repairs, ask a certified professional to check the foundation of the sewer lines and septic systems of the property.
  • Renovate – This is the last resort in managing plumbing issues in older homes. Replace the older pipes with new plumbing systems. Also, replace or repair the property’s water lines, drains, vents, and sewer lines.

Prior to buying a house, it’s always best to know and understand the common plumbing problems in older homes. Also, you should have a professional plumber evaluate the property’s current plumbing condition – which is why you should call us today!

Continue Reading

Things To Know When Installing A Tankless Water Heater

Tuesday, April 25th, 2017

Also known as a “demand type” water heater, a tankless water heater provides hot water only when needed. As such, it does not produce standby energy losses, which saves you money.

How a Tankless Water Heater Works

Water is being heated without the use of a storage tank. Cold water will travel from a pipe to the unit if a hot water tap is turned on. This means a tankless water heater delivers a steady supply of hot water. In other words, you do not have to wait for the storage tank to be filled up with enough hot water each time you need to use it.

Why Opt for a Tankless Water Heater?

  • Heating costs will be reduced – Enjoy monthly savings of up to 40% off your utility bill for the product’s life. Heating and reheating water in the storage tank is not required.
  • Only a small amount of space is needed – As compared to traditional water heaters, tankless water heaters will take up less space since this is just about the size of a small suitcase or even smaller.
  • Eco-friendly – Tankless water heaters are 30% more energy-efficient than tank water heaters. Maximum energy efficiency will help conserve natural resources.
  • Long-lasting – It has a longer lifespan for up to twice as much as that of the traditional water heater. This further means less waste in the landfill.
  • Clean – Avoid using water stored in a tank with accumulated rust.
  • Safe – A tankless water heater is equipped with excellent safety features to prevent injuries and burns caused by boiling water.

Installing and Maintaining Demand-Type Water Heater

Proper installation will greatly depend on different factors. These include the following:

  • Local building code requirements
  • Climate
  • Fuel type
  • Safety issues

Regular water heater maintenance is also important to extend the life of the water heater. This will also decrease loss of efficiency.

Proper installation and maintenance are very crucial to optimize the water heater’s energy efficiency. Therefore, it is best to have a licensed, skilled plumbing and heating contractor to install your tankless water heater.

Tips for Choosing the Right Contractor

  • Ask for references. Satisfied customers will give you peace of mind.
  • Request cost estimates from different contractors. Make sure that these estimates are for completed work and not just for sections of the system.
  • Check if they can get a local permit when necessary.
  • Determine if they fully understand local building codes.
  • Check if the plumbing contractor company is a member of the Better Business Bureau.
  • Sign the contract only after you’ve read and understood it.

If you’re looking to install a tankless water heater, please call us today!

Continue Reading

Troubleshooting Common Garbage Disposal Issues

Thursday, April 20th, 2017

Consistent sanitary practices must start in the home. Proper waste management must be observed by each and every household member, and this includes the proper usage of the garbage disposal installed under the sink.

What is a garbage disposal?

It is a device installed under the kitchen sink necessary for shredding food and grinding other waste into very tiny pieces, allowing them to pass through the sewerage system.

Essential parts and function of a garbage disposal

  • Hopper Chambers – There are two parts: the upper chamber for storing food waste straight from the sink, and the lower chamber for collecting shredded and pulverized garbage.
  • Insulated Motor – This is necessary for spinning the flywheel and impellers fast enough to obtain processed garbage. This is generally connected to the electrical switch for ease and safety.
  • Shredder Ring – This is the teeth-like shredder located right after the upper hopper chamber. It is the garbage disposal blade.
  • Flywheel and Impellers – These two main parts are responsible for bringing the food waste to the shredder ring. They work hand in hand with the shredder ring to efficiently grind and pound the garbage.
  • Reset button – This is found underneath the device. It plays a very crucial role in troubleshooting an overheated garbage disposal unit.
  • Waste Line Connector – This is where the processed garbage passes through when flushed down the sewer or septic system.

What to do when things go wrong?

When you are well-informed about the different parts and functions of your unit, you’ll generally know how to troubleshoot simple and common garbage disposal issues such as overheating, clogging or jamming, and having no power at all.

It is also recommended that you become aware of the warning signals that your disposal is unable to function properly. Signs include a foul odor, leaks, and a strange noise coming from the unit.

Determine if the problem can be fixed with simple troubleshooting or if it requires professional help.

An overheating garbage disposal unit may simply require pushing the reset button. If resetting doesn’t work, check the source of power. Something might have gone wrong with the circuit breaker.

A jammed garbage disposal can be fixed by helping the impellers move. Before touching the inside of the unit, turn off the circuit breaker for safety. Then you can proceed and try to dislodge the blockage underneath.

A foul odor indicates that the unit may be clogged or blocked. It means that the unit is unable to do its function of grinding food waste into pieces, which is why they don’t get flushed down the drain. This may also indicate that the blades or shredder aren’t sharp enough. Situations like these will need professional services.

Finally, a strange noise and water leaks must also be checked immediately by trained professionals as these signs indicate a much more serious problem. Call us today if you’re having a problem!

Continue Reading