Water Heater Repair Tips
Troubleshooting Tips For Common Water Heater Issues
In your house, your water heater works hard to provide hot water during showers, dishwashing, and laundry. Since we all heavily rely on our water heater, there are times where your water heater gets overworked. If you’re having trouble with your water heater, we recommend following these water heater repair tips. In need of a water heater repair? Contact Tureks Plumbing in Appleton, WI.
Common Water Heater Problems & Solutions
Water Heater Temperatures
Water temperature issues are common issues with water heaters. Here are three water temperature problems, as well as their possible causes and solutions:
- Water is cold – A lack of fuel, a defective thermostat, or a faulty heating element are the most common causes of cold water in a hot water heater. Begin by looking at the fuse box to make sure there are no electricity issues
- Water isn’t hot enough – If your water isn’t hot enough, it may be due to an undersized water heater, crossed connections, or a defective heating element or thermostat. Turning off the water source and turning on a hot water faucet will rule out a crossed connection. If the water still flows, you might have a crossed connection. Aside from that, we suggest contacting a plumbing contractor for a water heater inspection.
- Too hot water – Too hot water normally indicates that the thermostat is set too high. To change the thermostat temperature, consult your water heater manual. The U.S. Department of Energy recommends setting your hot water heater to 120° F for the best combination of heat and performance.
Water Heater Leaking
Water leakage can be caused by a variety of factors, including:
- Temperature and pressure issue (T&P) a safety valve
- Insufficient water heater problems
- Overheating a clogged valve
- A defective gasket
Next, inspect the loose heating element bolts and tighten them as required. If the heating element continues to leak, you will most likely need to replace the gasket. Additionally, look for leaks on or around the storage tank – since storage tanks usually corrode from the inside, you’re likely witnessing the beginning of the end for your water heater.
Of course, you can eliminate tank leaks entirely by investing in a tankless water heater. Our friends at McQuillan Bros, who provides the Twin Cities plumbing services, explains that tankless water heaters last almost twice as long as the storage water heaters. Additionally, they take up about a quarter of the room.
Rusty water may imply corrosion of your tank’s inner lining, which is often caused by a failing anode rod. Contact a licensed water heater technician to see if removing the anode rod would resolve the issue. From there, you’ll know if you need a water heater repair or water heater replacement.
The most common source of strange noises coming from your water heater is sediment buildup. You should try to resolve this issue by flushing the water heater. Ask our plumbers in Appleton, WI, about how to flush your water heater. If you flush your water heater and the issue continues, or if the sediment accumulation is too large to remove, contact us for an estimate on a water heater replacement.