Warm Weather Plumbing Tips

 In Plumbing Tips

Winter storms were the primary cause of some losses. As a result, water damage is one of, if not the, most serious here are some Warm Weather Plumbing Tips that may help in some ways.

Plumbing Hints for Your Pipes and Drains

However, severe weather isn’t your only adversary; defective plumbing can also cause water damage. We will be the most efficient if we stick to our maintenance schedule. The spring is the optimum time to get your plumbing pipes in Appleton WI back in working order.

To get you started, we’ve compiled a list of the most significant plumbing guidelines you should follow once spring arrives.

Obtain Those Leaks Fixed

Faucets and toilets squander around 25% of all drinking water. That is a gross waste of excellent food, but it also amounts to $700 million squandered.

If your faucet leaks at a 6 drips per minute, you might lose up to 1,200 liters of water each year. Consider how much more water you may be losing if you have more than one leaking faucet.

Performing a whole-house leak check is one of spring’s most crucial plumbing advice in Appleton WI. The quickest way to identify a leak is a water meter test.

A water meter is placed in the majority of residences. It might be around the floor junction along the bottom section of your front wall. When you’ve found your water meter, turn off all the water systems in the house and make sure no one is using any water while you conduct the test. The meter’s gauge should stop moving at this point. If the numbers haven’t moved after half an hour, you’ve got a leak.

Perform a Spring Test on Your Drains

Some drains might take longer to clear in the winter, especially if they have “frozen” FOG (fat, oil, and grease). On the other hand, FOG build-up may (hopefully) melt and allow for adequate drainage once spring arrives. However, it is important to note that you should never dump these things down the drain.

In any event, spring and summer are the most significant times to assess the proper health of your drains. After that, you’ll know which portions of your house have clogged drains and sewage pipes.

Begin the test by turning on the hot water faucet in each sinks. If the water drains quickly, that is great. However, you most certainly have blockages if it doesn’t, or if you hear gurgling sounds from the sink drain.

You may be able to get away with a plunger or a plumber’s snake for minor clogs but try to never use a drain cleaning solution. The toxic substances might cause pipe damage.

If you have blockages that refuse to clear no matter how many times you push your plunger, contact your local Tureks Plumber the best plumbers in Appleton WI. While you’re there, request the main drain line video camera examination to guarantee your line is clean and free of problems.

Install Drain Screens

Drain screens in Appleton WI are an excellent method to keep trash out of your drains. Drain screens filter out undesired materials, including small pieces of food, FOG, and hair, which should not end up in your drains and sewage systems.

So, if you’ve never utilized drain screens before, now is the moment. They’re incredibly inexpensive and simple to install; simply place them over the drain hole. Finer mesh screens are more effective in catching debris, but they take longer to drain water. It is entirely up to you to select the ideal size for your house.

Clean Out Your Hot Water Heater

Every day, the average person consumes around 75 liters of hot water. This hot water use, of course, increases throughout the winter season.

The problem is that when water is heated, the minerals in it separate from the water molecules. These wayward minerals will eventually collect and solidify at the bottom of your water heater tank. Some of these loose minerals may also adhere to the tank’s sidewalls.

These minerals can build up within your tank and cause scaling, making it less efficient. They can also cause your water heater to wear out prematurely.

Examine Your Toilets

Check your toilets for faulty flushes while we’re on the subject of flushing. A leaking toilet can waste up to 20 cubic meters of water each day, costing more than $80!

If you hear your toilet running irregularly, this is a sure indicator that it is leaking. Additionally, this indicates that it is flushing even when no one uses it. The most typical causes of these water wasters are failed seals and flappers.

Check the sides of the toilet bowl; if water is pouring down the edges, this is also a symptom of a leak. You may double-check this by putting a few drops of liquid food coloring in your toilet tank. Wait 15 to 30 minutes to see if the water in your toilet bowl has become colored. If it has, you have a leaky toilet tank.

A failing flapper is simple to replace, and a replacement may be purchased at a hardware shop. However, if you don’t have the time to fix it yourself or have more than one leak, it’s better to engage a local plumber.

Spring-clean your plumbing vent pipes as well.

The plumbing vent pipes in your home link to many of your plumbing fixtures. These pipes exhaust sewage gases from your drain pipes while allowing fresh air to enter them.

The problem is that vent pipes frequently reach through the roof. A portion of their aperture is exposed to freezing temperatures (and snow) during the winter season. As a result, they might get choked with ice and frozen plants.

Clogging in vents will reduce the efficacy of drains that connect to them. This is another reason why your drains may be sluggish in the winter. However, if solid material gets into your plumbing vents, your problems will last all year.

Contact Tureks Plumbing Services Today 

When it comes to you making sure that your system is up to date, making sure that you are doing a maintenance check. There are lots of different tips that you can follow to help save you money. Call us today to make an appointment so we 

Recommended Posts
spring maintenance with water heatersPlumbing Problem Prevention In Appleton WI