fbpx

Common Water Heater Problem

 In Plumbing Problems, Water Heater
common water heater problems - Tureks Plumbing Services

Common Water Heater Problems

Here at Tureks Plumbing Services, we are dedicated to ensuring that all your plumbing queries are answered and needs fulfilled. As we get into the cooler months, more plumbing problems will arise. In this article, we explore some of the most common water heater problems Fox Valley homeowners experience. If you need professional plumbing services in Appleton, WI, contact Tureks Plumbing today!

Water Heater Drip Tube

A dip tube is a plastic tube, usually long, that is present in almost all water heaters. It is fitted into the inlet of the water heater and hangs about 8 inches above the base of the tank. A dip tube that is properly functioning is designed to shoot the cold water coming into the base of the heater where it is heated quickly and with ease. If no dip tube is present in your water heater, the cold water mixes with hot water, which is at the top of the tank heater on its way to the outlet. This is what results in lukewarm water coming out of your faucets, instead of hot water.

In a scenario where the dip tube in your water heater breaks off, depending on how much of it broke off, you may either have only lukewarm water coming from your water heater into your faucets or the water may run out very quickly. Gilmore Heating and Air, an HVAC, and plumbing company in Sacramento explain that this is because the cold water remains at the top of the tank, where it cannot be heated and mixes with hot water from the hot water outlet, which is also located at the top of the tank—hence resulting in cold or lukewarm water going into your house’s hot water pipes before it has been sufficiently heated.

Water heaters manufactured between 1993 and 1997 are equipped with defective dip tubes, which, depending on the water chemistry in your locality, as well as the pH and temperature setting of the water, may result in these tubes crumbling, breaking, or dissolving into smaller pieces.

To check whether your water heater was manufactured between 1993 and 1997, check the first four digits on the serial number. These represent the month and year of manufacture. If the third and fourth numbers are 97, 96, 95, 94, or 93, your units could be affected. 

According to experienced Fox Valley plumbers, there are two options if you indeed have a bad unit. The first would be to replace the water heater and flush all faucet filters and screens in the house. This also applies to water heaters, which have been in use for more than ten years. The water heaters present on the market now are fitted and manufactured with dip tubes that last almost as long as the water heater. For a water heater replacement in Appleton, WI, contact Tureks Plumbing today.

The second option would be to replace the defective dip tube with a cross-linked polyethylene dip tube then flush the sediment, particles, and debris out of the filters, screens, and the water heater. It is important to note that you may have to flush the system more than once to clean the heater effectively. If you would prefer a professional to handle the matter, please reach out to a plumbing company in Appleton, Wisconsin.

Sediment Buildup in Your Water Heater

If your house has a storage-tank water heater, sediment buildup is something that is bound to happen. In the water heating process, water entering the water heater tank is often carrying dissolved naturally-occurring minerals such as magnesium and calcium, little amounts of sand as well as other debris. This debris, combined with the minerals, forms into sediment particles, and they settle at the bottom of the tank, explains OC water heater professionals at Do It Right Plumbers. When these sediment particles buildup, you may experience issues with your heating system such as:

  • Rumbling sounds when the water heater is on
  • Water temperatures fluctuating from lukewarm to hot
  • A decrease in the supply of hot water to your faucets

Sediment buildup affects the water heater’s ability to maintain a consistent temperature of the water, and it also wears down the energy efficiency of the heaters. As the buildup piles, these sediment particles can replace the water in the tank, block the water lines, block the drain valve, or cause untimely tank failure. If your tank prematurely fails, contact emergency Plumbers in Appleton Wisconsin for help with the installation of a new and far more efficient model.

Additionally, to help prevent sediment buildup, hire a professional plumber from Tureks Plumbing Services in Appleton, Wisconsin, to flush your storage tank periodically throughout the year.

Malfunctioning Heating System

Water heaters that have been functioning for 10 to 15 years may be faulty due to old age as well as wear and tear. Also, not flushing your water heater tank periodically throughout the year as recommended by professional plumbers may also interfere with the heating system of one’s water heater.

 A water heater may fail mostly in these three areas:

  • Thermostat
  • Thermal switch
  • The heating element

It is best to leave the diagnosis and water heater repairs to a trained and licensed professional plumber. If any of this information resonates with your water heating problems, please contact Tureks Plumbing Services in Appleton, Wisconsin, today.

Recommended Posts
Trenchless Sewer Repair Costs - Tureks Plumbing Serviceshow long will my pipes last - Tureks Plumbing Services